Engineering delays don’t announce themselves — they accumulate.

• In charge in the monitoring of the daily spool erection status.
• Monitoring of the daily delivery of spool and random/straight pipes and preparation of gate pass for workable spools to be delivered to the jobsite.
• Track and update the daily report of hauling, rigging, fit-up and full welding of pipe spools.
• Analyze and interpret piping isometric drawings to be able to determine and locate the field joints and connections in a pipe run i.e. reducer, tee, elbow, flanges and valves.
• Gather daily accomplishment report from the jobsite to be updated on a daily basis.
• Coordinates issues and concerns with other team members and other groups for the overall reporting of piping erection progress in daily, weekly and monthly basis.
• Performs other duties as instructed by the superior. Projects Worked

• Observe and familiarize the workflow for every department under project-based activities.
• Uphold knowledge in reading and analyzing AFC piping isometrics and structural drawings
• Familiarizing in welding processes, structural fabrication and assembly, piping works, painting and quality control. • Familiarize in concepts of Project Controls and Planning.
• Perform and conduct time and motion studies to get actual man-hours and consumables in structural, vessels and piping works based on real time activities.
• Observe and key-in problems encountered in the fabrication that cause delays.  Uphold knowledge in the health and safety policies and procedures.
• Monitors daily progress (Quantity Surveying) of in-house projects in the yard and coordinates necessary concerns to the other departments.
• Performs other duties and responsibilities as instructed by the superior. 

• Preparation and implementation of the HVAC system installation procedures and work instructions
• Resource requirements monitoring (manpower, equipment, consumables and materials) for HVAC installation works.
• Coordinates HVAC issues and concerns to all involved/affected discipline, departments, client and subcontractors.
• Prepares Material Approval Requests and Technical Bid Evaluation reports for HVAC materials and equipment as per approved client IFC drawings and project specifications.
• Liaise with Procurement and material expediting team to carryout necessary follow-ups with vendors / suppliers / sub-contractors for timely execution / delivery of the ordered materials and equipment.
• Attends/presides project coordination meetings to discuss progress and resolve problems.
• Preparation of work plan, daily job cards, progress reports and look-ahead schedules as required by Client.
• Ensure that all HVAC site activities are conducted under controlled conditions as per shop drawings, method statements, specifications and work plan.
• Prepares and submits Site Queries to client for specification review, clarifications, site installation concerns, deviations and modification proposals.
• Daily reporting on resources, materials, consumables, equipment and man-hours used for the execution of site instructions, site query correspondences and modification instructed by the client needed for variation/change orders documentation.
• Conducts site inspections / walk-downs for QA/QC compliance of duct works, refrigerant piping installation, insulation and cladding, and HVAC equipment installation such as AHUs, ACCU, Chemical Filter Units, Electric Duct heaters, Dampers and Exhaust Fans as per approved Inspection and Test Plan and project ITRs (Inspection and Test Record).
• Coordinates with HVAC vendor and sub-contractor on the needed actions to execute on the HVAC system and equipment to close and rectify punch items raised during QC inspections and walk-downs.
• Attends and witness factory acceptance test (abroad) to ensure HVAC equipment and accessories are complying with approved technical data sheets and general arrangement drawings as per approved Inspection and Test Plan.
• Close out of site instructions and site queries through site inspection and documentation.
• Assigned as objective champion in Right First-Time program requirement of the client, review and closeout of lessons learned from client previous projects, presides RFT toolbox talks and conducts site walkthroughs to assess project compliance of each discipline areas.
• Maintain good client relationship at all times.

• Responsible for implementation and monitoring of all mechanical works (MEPFS) based on approved construction plan, specifications, work methodology and safety procedures.
• Interpretation of construction drawings, review contract documents and approved specifications and applicable standards prior to job execution.
• Develops project objectives by reviewing project proposals, specification and plans; conferring with management.
• Determines project responsibilities by identifying project phases and elements; assigning workforce to phases and elements; reviewing bids and quotation from sub-contractors and suppliers.
• Estimate and prepare material take-off and assign resources (manpower, materials, consumables, tools & equipment) required to execute mechanical related works.
• Determines project specifications by studying product design, customer requirements, and performance standards; completing technical studies; preparing cost estimates.
• Conducts toolbox talks to discuss daily activities, quality and safety in every phases of the project.
• Ensures high quality workmanship and operation by designing and conducting tests and inspection as per client or project specification or applicable local regulation and standard.
• Liaise with suppliers, subcontractors and client for any job-related concerns. Manage and provide engineering and technical support to mechanical groups on site.
• Determines project schedule by studying project plan and specifications; calculating time requirements; sequencing project elements.
• Support field in expediting schedule, completion of field paperwork, expediting materials and equipment delivery.
• Maintains project schedule by monitoring project progress; coordinating activities; resolving problems.
• Controls project plan by reviewing design, specifications, and plan and schedule changes; recommending actions.
• Prepares work method statement and procedure for organized and safe execution of work. Projects Accomplished

• Responsible for the design and preparation of all mechanical, ventilation, air-conditioning and fire protection drawings using CAD software and verification of submitted construction plans by vendor/contractor for site implementation. 
• erforms HVAC design calculations (heat load calculation, ductwork and equipment sizing) using manual and software-aided approach (Carrier HAP, E20) following international standards (ASHRAE, SMACNA, etc.) to provide complete mechanical design.
• Review of project specifications, standards and local building design guidelines and regulations prior to mechanical and fire protection design execution.  Conduct project surveys on site by collecting necessary information and site condition assessment needed for design.
• Prepare estimates and material take-off needed for quotations and bidding process.
• Oversee all onsite and offsite constructions to monitor compliance with building and safety regulations.
• Oversee and manage mechanical aspects of the projects from design, construction, completion and hand-over.
• Oversee the installation of Samsung Experience Store/Customer Service Mechanical Systems
• Liaises with Account Managers, clients, architectural designers, contractors and building admin to ensure projects are within timelines, guidelines, quality standards and budget.
• Review quotations and costings submitted by vendors/contractors based on submitted mechanical plans.
• Maintenance check-ups for Samsung Experience Store/Customer Service. Conducts constant site inspections before and after construction while facilitating the tests conducted by building admin for acceptance with building admin and summarizes punch lists and resolutions report.
• Prepare site inspection and completion reports and organize paper works for proper project documentation.
• Submit status update on all projects handled on a weekly basis. 

• Reviewed all electrical submittals, providing detailed comments and guidance to ensure the successful execution of detailed engineering. Evaluations were conducted in strict accordance with local regulations, standards, and applicable international standards.

• Attended weekly coordination meetings with the EPC contractor and equipment vendors, ensuring alignment on project goals and addressing any emerging issues.

• Conducted site surveys at oil fields to gather critical information necessary for the accurate planning and execution of electrical projects.

• Actively participated in internal and external project meetings, including reviews of 3D drawings and HAZOP assessments, contributing to the overall safety and effectiveness of the projects.

• Contributed to the documentation and application of lessons learned from previous projects to improve future project execution.

Projects Handled/Involved:

• Upgrade of Electrical Substations in Beda Oil Field in Benghazi, Libya (Client: AGOCO - Arabian Gulf Oil Co. Libya).
• Detailed Engineering Phase for New Fiscal Metering System at Amal Field in Amal Oil Field, Libya (Client: Harouge Oil Operations).

• Managed a team of Electrical Engineers and Designers, ensuring effective collaboration and timely delivery of project milestones.

• Ensured that all design drawings produced by the team were fully compliant with client specifications, local authority requirements, industry codes, and standards before submission for client review and approval.

• Conducted site surveys and provided comprehensive reports to support accurate and efficient project execution.

• Performed system studies, including Short Circuit, Load Flow, Motor Starting Analysis, Arc Flash, and Protection Coordination using ETAP software to ensure the reliability and safety of electrical systems.

• Prepared illumination calculations using COOPER lighting software, ensuring proper lighting design that meets project requirements.

• Actively participated in both internal and external project coordination meetings, ensuring alignment across all stakeholders.

• Assisted the project team during the proposal stage by providing material take-offs (MTO), bills of quantities (BOQ), work volume assessments, engineering deliverables, man-hour estimates, and defining the electrical scope of work and demarcation. Participated in internal and external project Kick-Off meetings.

• Prepared material requisitions for long-lead electrical items and bulk materials, ensuring timely procurement to meet project deadlines.

• Developed individual design plans, material requisitions, and technical bid evaluations (TBE), and contributed to the Design Basis Memorandum.

• Coordinated with other disciplines, including Piping, Instrumentation, Civil, and Mechanical, to resolve technical issues related to P&ID, control philosophy, foundation details, and rotating equipment.

• Reviewed and evaluated electrical Vendor Print (VP) documents to ensure they met project specifications.

• Provided technical assistance to QA/QC teams by reviewing Inspection Test Plans (ITP) and method statements, ensuring adherence to quality standards.

• Demonstrated a strong commitment to health, safety, and environmental responsibility throughout all project phases.

• Participated in HAZOP meetings when required, contributing to safety and risk management processes.

• Participated in internal QA audits to ensure compliance with quality management systems.

• Participated in Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT) to verify full compliance with contract requirements and ensure system readiness for operation and on-time project delivery.

• Provided technical support to the construction team by responding to technical queries and clarifications, facilitating smooth project execution.

Projects Handled/Involved:

• Engineering, Procurement, Construction, and Management (EPCM) for Sebarok Offshore Expansion Project in Sebarok Offshore (Client: VOPAK).
• EPCM for Bulk Storage Tanks in Pengarang, Malaysia (Client: RAPID).
• Design and Construction of a 3.6 Megawatt Off-Grid Solar Photovoltaic System for SATS Airfreight Terminals 5 and 6, Changi Airport, Singapore (Client: Sembcorp Industries).

• Assisted the Lead Engineer in managing the electrical team, ensuring effective collaboration and task completion.

• Studied client documents, including project proposals and specifications, and raised necessary clarifications to ensure a thorough understanding of project requirements.

• Took responsibility for all electrical scope requirements related to various mechanical packages, ensuring alignment with project objectives.

• Ensured that all design drawings produced by the team were in compliance with client specifications, local authority standards, and industry codes before submission for client review and approval.

• Attended internal and external project coordination meetings with Mechanical Package Equipment Vendors and Client Representatives to facilitate smooth communication and address any project-related issues.

• Acted as the company’s focal point for electrical engineering matters, liaising with engineering services sub-contractors and vendors to ensure alignment with project goals.

• Prepared detailed Electrical Package Equipment Specifications and Datasheets for Gas Turbines, Diesel and Black Start Generators, MV Motors, VSDS, Switchgears, UPS, and other critical components.

• Prepared material requisitions for long-lead electrical items and bulk materials, ensuring timely procurement to meet project timelines.

• Prepared individual design plans, material requisitions, and technical bid tabulations (TBT), and contributed to the Design Basis Memorandum.

• Developed the Power Distribution System philosophy to guide the design and implementation of electrical systems.

• Provided technical clarifications for electrical components of various mechanical package equipment, ensuring accurate and efficient communication with all stakeholders.

• Attended Bid Clarification Meetings with bidders, clients, and other disciplines to resolve any uncertainties and ensure a clear understanding of project requirements.

• Coordinated with other disciplines, including Piping, Instrumentation, Civil, and Mechanical, to resolve technical issues related to P&ID, control philosophy, foundation details, and rotating equipment.

• Reviewed and evaluated electrical Vendor Print (VP) documents to ensure compliance with project specifications.

• Responded to client comments on submitted engineering deliverables, incorporating feedback to meet client expectations.

• Participated in HAZOP coordination meetings and internal QA audits to ensure safety and quality compliance.

• Conducted system studies, including Short Circuit, Load Flow, Motor Starting Analysis, Arc Flash, and Protection Coordination, using ETAP software.

• Performed illumination calculations using DIALUX software to ensure proper lighting design.

Projects Handled/Involved:

• Conceptual & FEED for North Malay Basin Offshore Platform – Greenfield Project in Malaysia (Client: HESS Exploration).
• EPCM for Malikai TLP (Tension Leg Platform) Project – HULL and Topsides, Greenfield Project in Sabah, Malaysia (Client: Sabah Shell Exploration and Production).

• Reported directly to the Senior Electrical Design Engineer, ensuring alignment with project goals and technical requirements.

• Clearly defined the technical scope of each project by making customer requirements and specifications explicit, ensuring precise execution.

• Prepared and managed detailed engineering and design schedules for assigned work, maintaining project timelines and milestones.

• Executed basic electrical engineering tasks in strict accordance with client requirements, ensuring high-quality deliverables.

• Provided early assessments of the company’s technical capabilities relative to customer expectations. Developed tailored solutions that closely matched client needs while optimizing the company’s existing standard offerings.

• Addressed technical inquiries from customers, Project Office Managers (POM), production teams, and draftsmen by delivering well-reasoned and expert advice.

• Formalized technical data for each job using Computer-Aided Design and Drafting (AutoCAD) software, ensuring accurate and precise designs.

• Reviewed and assessed suppliers’ abilities to comply with project specifications, coordinating closely with the materials section. Ensured thorough compliance by verifying supplier acknowledgments of EPS orders and actively participating in necessary meetings, including those with customers when the Senior Electrical Engineer was unavailable.

• Worked in close collaboration with the mechanical section to ensure cohesive project execution.

• Effectively utilized new tools such as ELECDES, AutoCAD 2000, MM3000 system, ELONET, and ECODIAL design software to enhance design accuracy and efficiency.

• Ensured all electrical design drawings adhered to project specifications, relevant codes, and industry standards.

Projects Handled/Involved:

• Design and Supply of 33kV & 13.8kV MC Set Switchgears for six different SEC-CRB Substations in Riyadh (S/S # 7115, 7113, 7782, 8077, 7845 & 7089) as per SEC-CRB Specifications. (Client: HADANIA CORPORATION / Saudi Electricity Company)

• Design and Supervision of 2000KVA Package Substation (Outdoor Kiosk), 33KV/380VAC, 3Ph., 4W, 60Hz, IEC Standard in Tabuk Garden Village-2B, Phase 1, Tabuk, KSA. (Client: Saudi Electricity Company)

• Construction and Monitoring of Two 132KV Substations (S/S No. 8055 & 8056), and Extension of Substation 8020; Design and Monitoring of AC Distribution Board 220/127VAC, 1000A, 3Ph., 4W, 60Hz, 25KA/1sec., IEC Standard. (Client: Daewoo Arabia Limited / Central Region Branch, KSA)

• Design and Monitoring of ATS (Automatic Transfer Switch), 220VAC, 1200A, 25KA/1sec., 60Hz, NEMA Standard for King Fahad International Airport, Riyadh, Saudi Arabia. (Client: Saudi Aramco)

• Taught core engineering subjects such as:
  • Electrical and electronic circuits
  • Energy conversion
  • Engineering materials
  • Mathematics
  • Physics
• Instructed on professional engineering topics, including electrical system design for buildings.

• Prepared comprehensive electrical design packages, including scope of work, electrical specifications, material take-offs, design calculations, construction drawings, material requisitions, and other necessary deliverables.

• Provided clear instructions to electrical designers and CAD operators, overseeing all related engineering design activities to ensure accuracy and efficiency.

• Prepared detailed material take-off (MTO) lists using Excel, ensuring accurate documentation of materials required for projects.

• Assisted senior engineers in evaluating technical bid documents, contributing to informed decision-making during the procurement process.

• Conducted regular site visits to monitor work progress, ensuring that it aligns with applicable codes, standards, specifications, and the overall design intent of the project.

• Interpreted and reviewed vendor drawings to ensure they meet project requirements and specifications.

• Enhanced expertise by studying industry practices and accumulating knowledge from more experienced colleagues.

• Applied Shell DEP standards and other international standards to all projects, ensuring consistency and compliance.

• Maintained positive relationships with consultants, vendors, and contractors, fostering collaboration and smooth project execution.

• Prepared power distribution system design calculations using Excel, ensuring precise and reliable designs.

• Utilized Philips lighting software to perform accurate lighting design calculations for various projects.

Projects Handled/Involved:

• EPC for Caustic Injection Pump (100HP, 480VAC, 3Ph, 60Hz) at Pandacan Oil Depot, Metro Manila, Philippines. (Client: Pilipinas Shell Petroleum Corporation)

• EPC for Retail Stations Upgrade at various retail stations in the National Capital Region, Philippines. (Client: Pilipinas Shell Petroleum Corporation)

• EPC for Substation No. 21A Upgrade (13.8kV, 4000A, 3Ph, 50kA, 60Hz) at Pandacan Oil Depot, Metro Manila, Philippines. (Client: Pilipinas Shell Petroleum Corporation)

• Collaborated with various disciplines including projects, procurement, main contractors, vendors, and other involved groups to ensure seamless project execution.

• Participated in the review of all electrical engineering deliverables submitted by contractors and consultants, ensuring compliance with project specifications and standards.

• Engaged in weekly coordination meetings with contractors, vendors, and third parties to discuss and clarify interfaces, requests, decisions, approvals, project status, and responses.

•  Provided contractors with essential conceptual documents, including specifications, datasheets, and single-line diagrams during the tender stage.

• Responded to contractors' technical queries, ensuring clear and accurate communication of project requirements.

• Conducted regular site visits to assess work progress, providing comments and oversight to ensure compliance with applicable codes, standards, specifications, and the project’s design intent.

•  Offered electrical support to construction contractors by clarifying technical issues during the construction phase.

• Participated in FAT and SAT to verify full compliance with contract requirements, ensuring system availability to support operations and on-time project delivery.

Projects Handled/Involved:

• Design and Construction of GIS 110 kV Substation for Madina Industrial City, Kingdom of Saudi Arabia (Client: SCECO).
• Design and Construction of GIS 132 kV Substation from Riyadh to Qaseem, Kingdom of Saudi Arabia (Client: SCECO).
• Design and Construction of 15MW Wind Power Plant in Taif, Western Province, Kingdom of Saudi Arabia (Client: SCECO).

• Performed engineering duties with a primary focus on power distribution design, including the preparation of essential electrical deliverables such as calculations and drawings.

• Participated in meetings with the Lead Engineer, clients, and third parties to discuss and clarify project interfaces, requests, decisions, approvals, status updates, and responses.

• Regularly reviewed the scope of work to identify any variations, whether initiated by the client or internally within the team. Secured approval from the Lead or Senior Engineer for any changes affecting the project budget or milestones before implementation.

•  Reviewed technical bid submissions for electrical equipment provided by qualified vendors, ensuring compliance with project requirements.

• Incorporated client-approved resolutions of all comments into the drawings and documents produced, under the guidance of the Senior Electrical Engineer or Lead Engineer.

• Applied the latest international and national standards, codes of practice, and good engineering practices to all work performed, ensuring high-quality and compliant outcomes.

• Conducted regular site visits to monitor work progress, providing feedback to ensure adherence to applicable codes, standards, specifications, and the project’s design intent.

• Conducted system studies, including Short Circuit, Load Flow, Motor Starting Analysis, Arc Flash, and Protection Coordination, using ETAP software to ensure safe and efficient electrical system design.

• Prepared power distribution system design calculations using SIMARIS (Siemens software) and lighting calculations using DIALUX software, ensuring accurate and reliable designs.

Projects Handled/Involved:

• Formula-1 Racetrack Project: EPC of Electrical Substations and External Lighting on Yas Island, Abu Dhabi, UAE (Client: Aldar Real Estate Properties).

• EPC of Power Supply Skid for Artificial Lift Well Project: Managed the power supply for five artificial lift wells in Asab and Shah, Abu Dhabi, UAE (Client: Abu Dhabi Company for Onshore Oil Operations - ADCO).

• Lighting and Power Supply Distribution System Design: Designed the lighting and power distribution system for the Baggage Handling System at Dubai International Airport Terminal 3, Dubai, UAE (Client: Dubai Municipality).

• Lead and manage a team of Electrical Engineers, Electrical Design Engineers, and Electrical Designers to ensure timely and efficient project delivery.
• Facilitate effective communication and collaboration within the team and with other engineering disciplines.Provide technical guidance and mentorship to junior engineers and designers, fostering a culture of continuous improvement.
• Oversee the electrical engineering aspects of multiple projects, ensuring compliance with project specifications, industry standards, and client requirements.
• Develop and manage project schedules, ensuring that all deliverables are completed on time and within budget
• Coordinate with project managers and other discipline leads to align project goals and resources.
• Review and approve electrical design documentation, including single-line diagrams, schematics, and layout drawings.
• Ensure all designs meet safety, reliability, and sustainability standards while optimizing cost and performance.
• Perform technical assessments and provide solutions to complex engineering challenges.
• Implement and enforce quality control procedures for all electrical engineering deliverables.
• Ensure adherence to relevant codes, standards, and regulations (e.g., IEC, NEC).
• Conduct design reviews and audits to ensure the integrity and accuracy of all engineering outputs.
• Interface with clients and stakeholders to understand project requirements and address concerns or changes in scope.
• Prepare and deliver technical presentations and reports to clients, providing clear and concise updates on project status and challenges.
• Allocate resources effectively within the team to meet project demands and optimize productivity.
• Monitor project budgets related to electrical engineering tasks and implement cost-saving strategies where applicable.
• Promote the adoption of new technologies and methodologies in electrical engineering design and execution.
• Lead initiatives to improve the efficiency, quality, and sustainability of electrical engineering practices within the team.
• Ensure that all electrical engineering activities comply with HSE policies and procedures.
• Identify and mitigate potential HSE risks in electrical designs and installatio

• Led the electrical engineering efforts for RFS-080 & RFS-084 projects for the RASGAS client, ensuring successful project execution and delivery.

• Assisted the team leader in managing the daily activities of the electrical engineering group, providing regular progress reports on deliverables, and overseeing a team of Electrical Engineers and Designers.

•  Reviewed client documents, including project proposals and specifications, and raised necessary clarifications to ensure alignment with project requirements.

• Ensured that all design drawings produced by the team were in compliance with client specifications, local authority standards, and industry codes before submission for client review and approval.

• Conducted site surveys and prepared detailed site survey reports to support project planning and execution.

• Performed system studies such as Short Circuit, Load Flow, Motor Starting Analysis, Arc Flash, and Protection Coordination using ETAP software. Prepared illumination calculations using COOPER lighting software.

• Actively participated in both internal and external project coordination meetings, including project Kick-Off meetings, to ensure clear communication and alignment across all stakeholders.

• Assisted the project team during the proposal stage by providing material take-offs (MTO), bills of quantities (BOQ), engineering deliverables, man-hour estimates, electrical scope of work, and demarcation.

• Prepared material requisitions for long-lead electrical items and bulk materials, ensuring timely procurement to meet project schedules.

• Prepared individual design plans, material requisitions, technical bid evaluations (TBE), and contributed to the Design Basis Memorandum. Reviewed and evaluated electrical Vendor Print (VP) documents.

• Coordinated with other disciplines, including Piping, Instrumentation, Civil, and Mechanical, to resolve technical issues related to P&ID, control philosophy, foundation details, and rotating equipment.

• Responded to client comments on submitted engineering deliverables and provided technical assistance to QA/QC by reviewing Inspection Test Plans (ITP) and method statements.

• Demonstrated a strong commitment to health, safety, and environmental responsibility throughout all project phases.

• Participated in HAZOP coordination meetings and internal QA audits to ensure compliance with safety and quality standards.

• Participated in FAT (Factory Acceptance Test) and SAT (Site Acceptance Test) to verify full compliance with contract requirements and ensure system readiness for operation and timely project delivery.

• Provided technical support to the construction team by addressing related queries and clarifications.

• Implemented, monitored, and controlled ISMS (Information Security Management System) as per KENTZ Information Security Manual, reporting any violations to the electrical Group Leader.

Projects Handled/Involved:

• RFS-080: FEED and Detail Engineering for AKG-454, Additional Feeder to DP-LCS058 Gas Metering Facilities, LNG Train 2, Ras Laffan (Client: RASGAS).
• RFS-084: Continuous Enhancement Monitoring System for various stacks located in Train-1, 2, 3, 4, 5, 6, AKG-1 & Utilities, RASGAS Refinery (Client: RASGAS).
• Sidra Medical and Research Center Project: Doha, Qatar (Client: Qatar Petroleum).

• Oversaw, monitored, and reviewed contractor transmittals related to the electrical engineering discipline, including electrical layouts, single-line diagrams, load schedules, system studies, specifications, material requisitions, electrical calculations, and other relevant deliverables. Ensured that all systems were safe to operate, maintainable, and compliant with international codes, standards, and project specifications.

• Assisted contractors in resolving technical issues and problems, providing guidance and expertise to ensure successful project outcomes.

• Evaluated, managed, and reported on electrical issues, including design reviews, risk assessments, and coordination with other departments to address and close out any concerns.

• Coordinated, monitored, and reviewed Technical Bid Evaluations for electrical equipment, ensuring that all proposals met the required codes, standards, and project specifications.

• Acted as an interface between the company’s project team and the Lead Contractor, ensuring effective communication and coordination on detailed engineering design matters.

• Actively participated in internal and external project meetings, including reviews of 3D drawings and HAZOP assessments, contributing expertise to ensure project success.

• Served as the company’s primary point of contact for electrical engineering issues, liaising with the Lead Contractor to address any concerns or challenges.

• Contributed to the documentation of lessons learned and applied relevant insights from previous Aramco projects to improve current and future project outcomes.

Projects Handled/Involved:

• Detailed Engineering of New Jazan Refinery in Jizan Province, Saudi Arabia (Client: Saudi Aramco).

• Lead the design of electrical systems for various projects, ensuring they meet all required standards.
• Create and review electrical diagrams and drawings.
• Choose the right electrical components for projects.
• Oversee the electrical engineering part of multiple projects, ensuring they stay on schedule and within budget.
• Work closely with other engineering teams to ensure smooth integration of electrical systems.
• Communicate with clients, contractors, and suppliers to keep projects on track.
• Guide and support junior engineers and designers.
• Review and ensure the quality of electrical designs.
• Solve technical issues that come up during projects.
• Understand client needs and offer technical solutions.
• Prepare and present reports and project updates to clients.
• Make design adjustments based on client feedback.
• Make sure all designs follow local and international standards.
• Keep up-to-date with changes in industry regulations.
• Assess and manage risks related to electrical safety.
• Introduce new technologies and methods to improve efficiency.
• Stay informed about industry trends and recommend useful new practices.
• Encourage continuous learning and improvement within the team.
• Effectively allocate team resources to maximize productivity.
• Monitor budgets and find ways to save costs without sacrificing quality.
• Ensure all work follows health, safety, and environmental guidelines.
• Identify and address potential safety risks in electrical systems.
• Promote a safety-focused culture in the team.

Oversee electrical work for refinery and petrochemical projects, keeping them on schedule and within goals.
Coordinate with other engineering teams to ensure smooth integration of electrical systems.
Communicate with contractors and vendors to meet project needs.
Review and approve electrical designs, ensuring they meet standards and regulations.
Provide technical guidance to ensure safe and accurate design and installation.
Conduct audits and inspections to maintain safety and quality.
Act as the main contact for electrical engineering issues, updating clients and stakeholders regularly.
Prepare and present reports and technical documents to management and partners.
Resolve any electrical issues raised by stakeholders.
Ensure all electrical work follows local regulations, international standards, and safety protocols.
Conduct risk assessments and implement safety measures to prevent electrical hazards.
Promote safety through regular briefings and training sessions.
Allocate resources effectively to ensure efficient use of manpower and materials.
Monitor budgets and find ways to save costs in electrical tasks.
Implement quality control procedures to ensure high standards in all electrical work.
Visit sites to check that installations match approved designs.
Address any defects or non-conformities in electrical systems.
Promote the use of new technologies and practices to improve project efficiency.
Lead efforts to improve the reliability and performance of electrical systems.
Provide leadership and mentorship to junior engineers and support staff.
Encourage collaboration and continuous improvement within the team.

• Reporting to the Project Manager, has the authority for the efficient management of project financial and administration matters.
• Full Document Control
• Administers Subcontractors and issuance of Subcontract Agreements and processing vendor invoices.
• Administers Head Contracts
• Submission of Progress Claims, Variations, Extension of Time, etc.
• In charge of managing project budget and preparation of system processing using Procore Tools.
• Request Quotations to Suppliers/Vendors/Subcontractors.

• Develop contract proposals to support organizational goal
• Review contract estimates, including proposed materials, production costs, etc and determine whether they seem reasonable and accurate
• Ensure that all records are accurate and up to date
• Write contract letters and other communications and notice
• Create regular status reports regarding progress on projects
• Analyze contracts to ensure they comply with state and federal laws and regulations
• AGED Receivables – follow up and chase client on daily basis
• Allocate payment receipts from client
• Prepare daily report of AGED Receivables and weekly forecast to stakeholders
• Bond applications to Surety companies
• Issuance and release request of issued bonds to clients
• Helps Project Managers to prepare and submit Claims/invoices to client
• Software/Applications used: Payapps, Odoo, Smartsheet, Monday.com, Aconex, Tanda, MS Excel, MS Words, SharePoint

• Prepare quantity take off for all new Cloudstaff facilities
• Evaluate contractor’s bill of quantity
• Visit sites to check project status and development
• Looks for new subcontractors and supplier for all required works
• Request quotation from suppliers/ subcontractors
• Liaise and coordinate with Project in charge, Engineers, subcontractors and suppliers to sustain the flow of works
• Software/Applications used: Google spreadsheet, MS Excel, Planswift, Google Drive, AutoCAD

• Responsible of Reviewing Sub-Contract Agreements, Local Purchase Orders and other form of contracts received from Clients.
• Liaison to Operational team for the preparation, review & checking of veracity and substantiation, and ensuring prompt on-time submission of Monthly Interim Payment Application to Clients.
• Championing the tracking, chasing and collection of payment certificates from Client
• Recommends the issuance and submission of Tax Invoice to clients
• Document Control – Securing all issued and received commercial documents are saved electronically and files hard copies.
• Producing various commercially related reports and correspondences such as Request of Extension of Work & Time, Final Statements, Notice Letters and Monthly Sales Reports.
• Overall in charge of WJGL monitoring system of all Project Accounts in Commercial and Accounting aspects – Total Application, Total Certification, Total Payments and Outstanding Payments.
• Software and Application used: AutoCAD, MS Excel, MS Word and Smartsheet

• In-charge of preparation of Quotation/Tender Proposal to Clients.
• Prepares quantity take offs during tender stages and post-contract stages - Estimation of rebar steels, concrete, beams, anchors, struts etc.
• Responsible of Reviewing Sub-Contract Agreements, Local Purchase Orders and other form of contracts received from clients
• Prepares Interim payment application, rental invoices, tax invoices, project statements and variation claims.
• Producing various correspondences to Client such as Notice of variation works, mobilization/demobilization letters, extension letters, etc.
• Responsible of procuring materials including issuance of LPO and sub-contract agreements to Suppliers and Subcontractors
• Liaison to Engineers, Clients, Suppliers, and subcontractor to fulfill QS obligations
• Prepares certification and assessment to the claims of Supplier and Subcontractors.
• Administer and monitor the status of all tenders, running and completed projects
• Document Control – Securing all issued and received commercial documents are saved electronically and files hard copies.
• Software and Application used: AutoCAD, MS Excel, MS Words

• Prepares quantity take offs for pre and post contract works
• Prepare Bill of Quantities for invoice preparation and work schedules
• Marking of drawing to identify the work progress and prepare reports to managers
• Request quotations from suppliers/subcontractors
• Manage and update of project monitoring
• Document Controlling – Save soft copies to the right folders and saved original to project files
• Attend and inspect site to evaluate subcontractors billing requests and work progress
• Software and Application used: AutoCAD, MS Excel, MS Word

• Assist in detailing and modeling of structural steel, cast in place and precast concrete, structures this includes plans, sections, elevations, and details cut automatically in 3D model for medium and large scale projects.
• Application of components necessary to complete the joint connections based on design and engineering calculations; create erection plans, shop drawings, single part drawings and gather sheets

• Read blue print and technical documents in order to prepare estimates
• Use computer softwares to calculate estimates
• Collaborate with Engineers, Clients, Architects, and Contractors on estimates

• Performs the review of Plans and Specifications of Architectural, Interior Design, Structural and other trades such as Mechanical, Electrical, Plumbing / Sanitary, Fire Protection, Site Development and Landscaping as to its completeness and constructability to minimize change orders / variation orders & claims from Contractors
• Monitors the contractor (s) interfacing and coordination as necessary for all aspects of the project.
• Monitors the construction works in progress for compliance with drawings, specifications, and contract documents.
• Clarifies technical problems, coordination their resolution with the Architect / Engineer Consultants and Owner as required.
• Monitors contractor (s) maintenance of as-built drawings and accepting possession upon contract completion.
• Review together with the QS, Contractors (s) change order request for variations in time and cost and making recommendations for settlement.
• Conducts acceptance inspection for the inspection for the Owner and preparing completion of known defects (punch list) and following up on remedial works.
• Provides procurement, expediting and warehousing management services for owner furnished items as required.
• Executes contract close-out with contractor (s) upon completion of work/project.
• Clarifies / discusses procedures for processing of shop drawings, sample of materials and catalogs of equipment (All sample materials and brochures shall become the property of the Owner); procedures to monitor preparatory works for attainment of the scheduled progress of works.
• Reviews, evaluates, processes all application of progress billings or payments of the contractors and vendors per approves procedures of the Owner.
• Verifies, evaluates and recommends for approval by the Owner field revisions, change orders and substitutes due to the existing conditions or changes in designs and specification authorized by the Owner before implementation.
• Monitors on-site security, first aid, fire protection and safety programs approves by the Owner, including the protection of Owner, including protection of Owner furnished materials and equipment.
• Monitors closely the effectivity of all Bonds and Insurances and advise the contractor at least 3 months prior to expiration.
• Discusses and implement the necessary Quality Assurance / Quality Control Programs to ensure compliance by all Contractors and Vendors with drawings, specifications and contract documents.
• Checks the materials and workmanship for compliance with plans, specification and contract documents.
• Inspects and audit the contractors work at the project site. Report to the RCM any deviation from the contract documents, drawings and specifications or against accepted construction and / or engineering standards and practices with prior approval from the Owner.
• Supervises and arrange the inspection, testing and acceptance of all materials (including Owner furnished) before the materials are utilized in the Project. Evaluation reports and recommendations, of the test results shall be submitted to the RCM for review.
• Requires the contractors after the award of works to submit the Technical Submittal Schedule and see to it that those submittals are submitted on time for review and approval by the Design Consultants concerned. Review and comment first on all Technical Submittals prior to submission to Design Consultant.
• Full time site inspection of works to ensure conformity with plans and specifications and related documents. Report non-conformance and resolve the design immediately
• Together with the QS will advise and assist the RCM in maintaining control of the cost from the start of the project up to its completion and close-out stage.
• Periodically reviews, prepares estimates with QS, for approved changes by the Owner, and revise the project cost construction progresses. Approved cost changes shall be incorporated as they are approved. Monitor estimates changes to be sure that neither the Master Project Time Schedule / CPM for the contract (s) price is in danger or being exceeded.
• Review and process together with the QS applications for progress payments. Advise the owner regarding the items which have to be completed or completed with prior to the approval of the progress payment.
• Review and determine the validity of Contractors claims and provide recommendation. Quantity Surveyor shall do the evaluation of claims if such has merit.
• See to it that all the labor, materials, and equipment of the contractor are adequate and available beforehand for the scheduled work to prevent delays.
• Coordinates with the design consultant and contractors regarding clarifications on plans and specifications and other design issues to ensure expeditious executions and completion of works thus avoid project schedule slippage. Attend to all problems for immediate resolution and anticipate potential problems to prevent them from occurring.
• See to it that all labor, materials, and equipment of the contractors are adequate. Update and keep the current Master Project Schedule vis-à-vis the detailed work schedule / program of the contractors. A “catch-up schedule” will be required from the contractor to prevent further slippage on their schedule. Monitor the “look ahead” schedules.
• To ensure those OSM are delivered on time constraint monitoring and follow-up are needed. Thus, will not cause delays on the works of the contractor.
• Ensure that the contractors maintain a current set of records, construction drawings and specifications and any other required Project documents, at the Project Site.
• Prepares and keep accurate daily progress reports during all the stages of construction.
• Ensure the preparation of the As-built plans as the work progresses.
• Review of all contractor (s) documentation and test records for adequacy at the time of hand over.
• Accepts and review for completeness and hand over to the Owner all operations and maintenance manual.
• Assist the Owner with the warehousing management of surplus stock items (if there is any), specified in the contract documents.
• Prepare a punchlist (defect lists) of all items of the works which require correction after the Project is substantially completed and before the final inspection is made by the Owner.
• Ensures the each items for correction in the punchlist is corrected before initial acceptance is recommended by the Owner.
• Collate all punchlists of the Project Technical Group (PTG), Owner’s marketing and sales group for rectification of the contractors / vendors / subcontractors.
• Record all approved deviations and reviews the as-built plans which shall be prepared by the contractors prior to final drafting. These shall be incorporated in the original drawings, and handed over to the Owner.
• Determine and prepares the list of scrap and surplus materials from those which were supplied by the Owner. These exclude all materials covered by the guaranteed quantities of the contractors.
• Submit status, utilization report and inventory list of all properties of the Owner on the Project site.
• Toward the end of construction, list of deficiencies that need to be corrected are listed (punchlist). Arrange joint inspection once rectification works are all done accepted.
• During the construction, we require contractors to submit partial / preliminary As built drawings together with the Progress Billings so final shop drawings can be easily checked on accuracy.
• As part of the project handover, all operations and maintenance manuals are consolidated and submitted to Owner for reference of the Building Operations and Maintenance Group.
• All copies of the warranty agreement / certificate provided by the Contractors and Suppliers are consolidated and submitted to Owner at the end of the Project Construction.

• Assist Quality Control Supervisor / Assistant Supervisor in evaluating of constructed infrastructure prior to turnover to client.
• Review Plans and documents made by the contractors prior to inspection.
• Checks and monitors compliance and conformity of construction to design and specifications.
• Conducts site inspection to validate the installed system prior to turnover
• Attend the weekly site coordination meeting.
• Make technical reports
• Review Turnover documents to Units, Common Areas, Hallway and Amenities to Owner / Client.
• Ensures the quality records, acceptance certificate, completion certificates and documentation for specific systems and Buildings / areas are prepared and collated in accordance with project requirements.
• Coordinate with the construction group for the completion of turnover of as built turnover documentation.
• Plan and Direct all activities concerned with the project coordination activities.
• Assist QC Head (Head Office) in evaluating the constructed infrastructures prior to turnover.

• Supervising and overseeing the direction of the project (or a package), ensuring that the client’s specifications and requirements are met, reviewing progress and liaising with quantity surveyors to monitor costs
• Liaising with the client, other construction professionals and, sometimes, members of the public
• Coordinating and supervising construction workers
• Selecting tools and materials
• Making safety inspections and ensuring construction and site safety
• Checking and preparing site reports, designs and drawings
• Maintaining quality control procedures
• Finding ways to prevent problems and to solve any that crop up
• Assessing and minimizing risk
• Writing reports and keeping on top of paperwork
• Helping to negotiating contracts and securing permits and licenses.

• Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.
• Formulating project parameters and assigning responsibilities to the most capable employees and monitoring the project team
• Interacting with clients, interpreting their needs and requirements, and representing them in the field.
• Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project’s status.
• Cooperating and communicating with the project manager and other project participants and collaborating with senior engineers to create more efficient project methods and to maintain the projects profitability.
• Reviewing the engineering tasks and initiating the necessary corrective actions.
• Developing specifications for the project’s needed equipment
• Creating frameworks to measure the project’s metrics and data collection
• Establishing field test methods and methods for monitoring quality of those tests
• Ensuring the projects compliance with the applicable codes, practices, policies, performance standards, and specifications.

• Responsible for ensuring that the quality of the works being delivered by the project team is in compliance with the project quality plan, procedures, and instructions.
• Implement the QA/QC management system at the site
• Coordinate with quality inspections with all the site sub-contractors and vendors coordinate all non-destructive testing on site
• Coordinate with the customers representative on all quality matters
• Coordinate all receipt inspections
• Distribute relevant QA/QC documentation to site subcontractors
• Verify that the quality-related site activities are in accordance with the applicable codes and standards
• Participate in the site internal and external site audits
• Coordinate all the quality site inspections through the site QC inspectors
• • Ensure all quality control documentation is compiled and completed for as-built hand over through the QC turnover engineer
• • Control all non-conformance reports and undertake remedial action
• • Compete site quality control instructions and action remedial responses
• • Review the customer’s specification and undertake relevant training to the site QC inspector
• • Monitor the implementation of the approved site QC Plan
• • Complete and coordinate the approval of the site QC technical submittals to the customer
• • Coordinate with the site construction manager on all quality issues Coordinate and chair the QA/QC site weekly meetings with the project’s subcontractors QC personnel
• • Elaborating inspection and test programs
• • Ensure the safety is adhered to at the site
• • Assure all technical documents relative to site quality control are the current status

• Responsible for QA/QC documents of the complete project, including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered, and other important QA/QC documents.
• Develop and determine all standards to perform inspections and tests on all procedures, oversee all testing methods, and maintain high-quality standards for all processes.
• Review the quality of all materials at the site, ensure compliance with all project specifications and quality, and collaborate with the department for all material procurement and quality materials.
• Supervise the effective implementation of all test and inspection schedules, ensure adherence to all procedures, and coordinate with various teams to perform quality audits on processes.
• Assist employees in ensuring knowledge of all quality standards, ensure compliance with all quality manuals and procedures, and collaborate with contractors and suppliers to maintain the quality of all systems.
• Monitor an efficient system, record all project activities, and analyze all processes to ensure all work meets quality requirements.
• Manage all work methods, maintain knowledge of quality assurance standards, monitor continuous application for all quality assurance processes, and recommend corrective actions for all operations.
• Develop a method statement for the activity, including risk assessment, job safety environmental analysis, and Inspection
• Test Plan and Checklist based on project specifications.
• Liaise with the Technical Engineer for submission of material submittals to the Consultant
• Coordinate with the Consultant’s representative and Site In-charge for Inspection.

• Proficient at analyzing and understanding Architectural, structural drawings as well as specifications and other documentation to prepare time, materials, and labor estimates.
• Skilled at developing estimates of raw building materials for Commercial projects to include the following product categories: engineer wood products, floor/roof trusses, wall panels, floor panels, siding and soffit materials, exterior deck materials. Confer with engineers, architects, owners, contractors, and subcontractors on changes and adjustments to cost estimates. 
• Prepares work to be estimated by identifying which materials are needed for each type of project, including all roof types, siding, gutters, etc.
• Perform other duties and responsibilities as required and assigned

• Proficient at analyzing and understanding Architectural, structural drawings as well as specifications and other documentation to prepare time, materials, and labor estimates.
• Skilled at developing estimates of raw building materials for Commercial projects to include the following product categories: engineer wood products, floor/roof trusses, wall panels, floor panels, siding and soffit materials, exterior deck materials. Confer with engineers, architects, owners, contractors, and subcontractors on changes and adjustments to cost estimates.
• Prepares work to be estimated by identifying which materials are needed for each type of project, including all roof types, siding, gutters, etc.
• Perform other duties and responsibilities as required and assigned.

• Prepared comprehensive CSA (Civil, Structural, and Architectural) quantity take-offs, detailed cost breakdowns, and complete tender documentation to support accurate project costing, budgeting, and client presentations.
• Analyzed and evaluated subcontractor quotations, conducted tender analysis, and performed cost comparisons to ensure competitive pricing and alignment with project specifications.
• Collaborated with project teams to verify scope requirements, identify cost-saving opportunities, and maintain consistency between design intent and budget constraints.
• Assisted in the preparation of bid proposals, including pricing schedules, technical submissions, and supporting documentation to meet client and regulatory requirements.
• Maintained organized records of estimates, supplier pricing, and tender documents to support future project referencing and audit requirements.
• Supported contract administration activities, including variation cost assessment, progress valuation, and coordination with subcontractors during the procurement phase.

• Prepared comprehensive quantity take-offs and detailed cost estimates for a wide range of commercial and fit-out projects, including office spaces, retail establishments, and mixed-use developments.
• Contributed to cost planning, feasibility analysis, and budget development for projects serving Singaporean and broader Asian markets, ensuring alignment with client objectives and financial constraints.
• Collaborated closely with project managers, architects, and contractors to evaluate design proposals, identify cost-saving opportunities, and enhance value engineering initiatives.
• Monitored project costs throughout various stages of development, ensuring accuracy, consistency, and adherence to approved budgets.
• Reviewed tender documents, analyzed subcontractor quotations, and assisted in procurement processes to support timely and cost-effective project execution.
• Maintained detailed cost databases and prepared regular cost reports, forecasts, and financial updates for stakeholders.
• Ensured compliance with industry standards, contractual requirements, and company procedures while supporting overall project delivery and financial performance.

• Prepared comprehensive quantity take-offs for architectural, structural, civil, and external works based on Australian residential drawings and specifications, ensuring alignment with project scope and design intent.
• Developed detailed and accurate cost estimates, including elemental cost plans and trade-specific breakdowns, to support tender submissions and pre-construction planning.
• Conducted thorough reviews of drawings, specifications, and scope documentation to identify discrepancies, omissions, and potential cost risks, ensuring completeness and accuracy of all estimates.
• Assisted in the preparation and evaluation of variation orders by analyzing design revisions, assessing cost impacts, and updating estimates in accordance with client requirements and project changes.
• Collaborated with project managers, engineers, and consultants to clarify technical details, optimize cost solutions, and ensure estimates were aligned with project objectives and timelines.
• Maintained and updated cost databases, historical data, and pricing benchmarks to improve estimating accuracy and efficiency.
• Performed value engineering analysis to identify cost-saving opportunities without compromising quality, safety, or project requirements.
• Supported procurement activities by preparing bills of quantities, analyzing subcontractor quotations, and assisting in bid comparisons and negotiations.
• Ensured compliance with relevant Australian standards, building codes, and industry best practices throughout the estimating process.

• Producing accurate and detailed as-built drawings for completed projects, ensuring all revisions and field changes are properly documented in accordance with project specifications and industry standards.
• Monitoring overall project progress, tracking milestones, and coordinating with relevant teams to ensure timely completion of tasks and adherence to project schedules.
• Assisting in project planning and execution by reviewing technical drawings, specifications, and scope requirements.
• Coordinating with engineers, architects, and site personnel to verify design changes and resolve discrepancies.
• Maintaining organized documentation of project records, including drawings, reports, and correspondence.
• Ensuring compliance with quality standards, safety regulations, and company procedures throughout the project lifecycle.
• Providing regular progress updates and reports to stakeholders, highlighting potential delays, risks, and recommended solutions.

•  Handles and supervise assigned various projects.
• Coordinate with the Government contractors regarding project status, progress, accomplishments and billings.
• Prepares contractors billing documents and reviews/approves accomplishment reports.
• Prepares plans, schedules and other project documentations
• Reports directly to the District Manager

• Reports to Project Manager Prepares all construction documents from Quantity Surveying, Bar charts, materials/labor takeoffs, scheduling and project close out documentations.
• Handles and supervise projects.
• Coordinates with the client’s Architects and Building Administrator.
• Design and drafts plans for various clients through AutoCAD. Reports directly to the General Manager.

•  Reporting to the Vice President for Operations Prioritize, plan and coordinate project development activities according to customer requirements.
• Supervise development team on daily basis to execute assigned projects within deadlines and budget.
• Act as primary contact for customer queries and concerns.
• Perform customer negotiations for contractual terms and agreements.
• Prepare project proposals and develop project plan, schedule and budget.
• Assess potential risks and technical challenges and develop appropriate mitigation plans.
• Perform cash flow analysis and process invoices in a timely fashion.
• Develop business presentations for customer as needed.
• Develop cost reduction initiatives while maintaining quality and productivity.
• Interact with customers to clearly understand business needs and expectations.
• Build positive working relationships with customers and ensure customer satisfaction.
• Analyze and resolve project issues in timely and accurate manner.

• Reporting to Head of Construction Handles and manages Alteration and Additional Projects
• Conduct weekly meetings with engineering, designers and consultants
• Supervises Subcontractors daily activities and accomplishments
• Ensuring that both the health and safety project plans are implemented
• Being on site to oversee all the construction process
• Organizing the Site Admin/Engineers for ensuring that they are performing as required
• Ensuring that the stipulated safety rules and regulations are met Follows the project construction process to ensure that it is completed in time
• Monitors the subcontractors that they are punctual and that they deliver the target schedule 
• Ensure that quality is preserved in the construction process and that the budget is maintained
• Review and assess different construction methods, sequencing, potential problems and timelines
• Implements engineering/construction plans/specifications, methods and procedures

•  Reporting to the President & Client, Presides Construction Coordination Meeting, Project Management Technical Meeting & Health, Safety, & Environment Meeting. Implements project plans to meet objectives
• Coordinates and integrates project activities Manages, leads, administers project resources
• Monitors project activities and resources to mitigate risk Implements and maintain quality assurance processes
• Makes improvements, solves problems, takes corrective actions when problems arise
• Gives presentations or briefings on all aspects of the projects
• Participates in phase, milestone, and final project reviews Identifies project documentation requirements or procedures
• Develops and implements work cycle, look ahead schedules and target date plans
• Manage Construction Progress

•  Reporting to Project Manager Handles and supervises manpower’s daily activities and accomplishments
• Ensuring that both the health and safety project plans are implemented
• Being on site to oversee all the construction process
• Ensuring that the budget is followed in terms of purchases and wages
• Organizing the workers and ensuring that they are performing as required
• Recording the total costs for materials bought and payments for work done
• General inspection of the workers and their performance and safety
• Ensuring that the stipulated safety rules and regulations are met Follows the project construction process to ensure that it is completed in time
• Supervises the subcontractors and ensures that they are punctual and that they deliver
• Ensure that quality is preserved in the construction process and that the budget is maintained
• Reports daily, weekly and monthly accomplishment.

•  Reporting to the Project Director
• Prepare Quality Inspections and monitoring on Various Projects.
• Meeting with Project managers on various site regarding their quality and workmanships on site.
• Prepares project punch list, Certificate of completions and handover documents.

•  Reporting to the Project Manager Attend weekly coordination meeting with Client, Project Manager, Tower Managers and the consultant.
• Handles all external finishing works (including hardscaping, landscaping, water features, building amenities, infrastructure, road works, underground utilities installations, etc.)
• Ensuring that all the External works teams were fully aware of the relevant site instructions, method statements, inspections and test plans.
• Checks the weekly & monthly report of External Works Engineers for submission to Project Manager and Client.
• Studies the Master schedule of Work, and then elaborates the activities in order to be displayed in weekly basis for closer and proper monitoring and controlling of undergoing activities.
• Ensure that the quality of materials, workmanship was based on plans and specifications and strictly implemented.

• Reporting to the General Manager
• Conduct meeting & seminars for the safety awareness of workers and management. 
• Implement and provide the company safety rules and regulations.
• Ensuring that all the construction team is fully aware of the relevant construction procedures, method statements, inspections and test plains and correctly implement them.
• Plans, discusses and reviews all activities to the site engineers on a daily basis. Implement safety inspection on manpower, tools, equipment and workplaces.
• Cooperates with the Client’s Project Manager to ensure that the project quality system requirements are properly implemented
• Studies the Master schedule of Work, and then elaborates the activities in order to be displayed in weekly basis for closer and proper monitoring and controlling of undergoing activities.
• Prepares and submits weekly and monthly safety reports and project accomplishment reports to the General Manager
• Ensures the workforce meets its commitment to our clients in terms of project accomplishment and schedules of completion.

• Reporting to Managing Director
• Manages all transaction in regards with  Cell sites projects, implementations, operations and cash flows.
• Ensures the workforce meets its commitment to our clients in terms of project accomplishment and schedules of completion.
• Controls labor allocation and ensure that carrying out the works in the most efficient manner and in the stipulated time, budget and quality
• Weekly Coordination meeting with the client’s Project Manager
• Attends project acceptance at provincial areas together with the main contractor and company representative.
• Responsible for gathering prospective engineering related projects.
• Checks all project documentation for filing of close-out documents and other billing purposes.
• Checks, reviews and approves all documents such as PERT-CPM, Bar Charts, Manpower & materials Take-offs, Cost Estimates, etc.
• Design and drafts details, schemes, shop drawings, as-built plans, project presentations and other documents using AutoCAD.
• Arrange meetings with the government officials and other who is concerned in the proposed site location, before implementing  cell site projects.

• Manages all company related projects.
• Handles and supervises all civil works related projects
• Ensures all workforces meet its commitment to our clients in terms of project accomplishments and schedule of completions.
• Responsible for all company meetings, transactions and documentations, from project’s prebidding meetings to project implementations.
• Represents the company in terms of client’s emergency calls and other special events.
• Attends pre-qualification biddings and site surveys/inspections for prospective projects. .
• Prepares all necessary bidding documents such as Project Estimates, Manpower & Materials  Takeoffs, Schedules, PERT-CPM & Bar Charts.
• Presides weekly meeting concerning project status on sites
• Attends weekly Mancom (Manpower Committee) meeting with the President and other Managers.
• Design and drafts details, schemes, shop drawings, as-built plans, project presentations and other documents using AutoCAD program
• Reports to the Operations Manager regarding project status and other Telecommunication projects and other concerns

• Overall responsible for all projects, planning and management
• Handles experienced engineers, foremen, and skilled workers
• Gathers related projects on various prospective customers/clients.
• Attends meetings, seminars, biddings and site inspections.
• Transacts with bank’s manager or bank’s representatives in regards with the company’s accounts and other bank concerns.
• Presiding weekly meetings at the site with client’s representatives, engineers, foremen, and manpower. Coordinates with the client’s
• Managers regarding project status and project accomplishments.
• Reviews, checks and approves Bill of Quantities, Bar Charts, Manpower & Materials Takeoffs, PERT-CPM, S-curves, Project accomplishment reports and Billing documents.
• Design and drafts details, schemes, shop drawings, as-built plans, project presentations and other documents using AutoCAD
• Monitors budget, expenses, project cash flows

• Reporting to the Vice President for Operations
• Prioritize, plan and coordinate project development activities according to customer requirements.
• Supervise development team on daily basis to execute assigned projects within deadlines and budget.
• Act as primary contact for customer queries and concerns.
• Perform customer negotiations for contractual terms and agreements.
• Prepare project proposals and develop project plan, schedule and budget.
• Assess potential risks and technical challenges and develop appropriate mitigation plans.
• Perform cash flow analysis and process invoices in a timely fashion.
• Develop business presentations for customer as needed.
• Develop cost reduction initiatives while maintaining quality and productivity.
• Interact with customers to clearly understand business needs and expectations.
• Build positive working relationships with customers and ensure customer satisfaction.
• Analyze and resolve project issues in timely and accurate manner.

• Overall responsible from Tender documentation to project completion and turnover.
• Gathers related projects on various prospective customers/clients.
• Facilitate coordination meetings, seminars, biddings, and site inspections.
• Presiding weekly meetings at the site with client’s representatives, engineers, foremen, and manpower.
• Coordinates with the client’s Managers regarding project status and project accomplishments.
• Reviews, checks and approves Bill of Quantities, Bar Charts, Manpower & Materials Takeoffs, PERT-CPM, S-curves, Project accomplishment reports and Billing documents.
• Reviews, checks and approves Design and drafts details, schemes, shop drawings, as-built plans, project presentations and other documents
• Monitors budget, expenses, project cash flows.

• Multiple Roads, Canals, Culverts & Multi-Purpose Buildings – 2nd District, Nueva Ecija, Philippines

• Selling & Renting out Scaffoldings

• UAE Presidential Guard Shooting/ Training Range @ Wadi shabak, Al Awir, Dubai
• Infrastructure/ Land Development Works and Fuel Complex @ Sweihan Air Base – Zayed Military City, Abu Dhabi
• Abdul Rhaman Ali – G+2 (13 Rooms) Luxury Villa Al Barsha South, Dubai,

• Land Development Works @ Langkiwa Southville 5A Water System – Langkiwa, Biñan, Laguna, Philippines
• Land Development Works @ Redwood Subd. – Langkiwa, Biñan
• Restoration Works @ Calauan Southville 7 Water System – Brgy. Dayap, Calauan, Laguna, Philippines

• Land Development Works @ Eton 68 Roces Project - Don A, Roces Ave., Quezon City, Philippines
• Land Development Works @ Woodsville Residence Project – Merville, Parañaque City, Philippines
• Engineer, Housing (November 24, 2011 – February 3, 2012)
• St. Matthew Height Village (PNP-AFP Housing Project) - Norzagaray, Bulacan, Philippines

• Renovation Works @ MEDICard Philippines - The World Center Bldg., Makati City, Philippines

• Robinsons Supermarket - Nuvali, Sta. Rosa, Laguna, Philippines

• Multiple Residential Houses - Cabanatuan City, Nueva Ecija, Philippines

• Have designed greater than the sum of 10,000 Boiler Horsepower boiler.
• Design of furnaces for solid fuels.
• Design of conveyors (i.e. screw, bulk bucket, pneumatic conveyor) and other material (solid fuel and ash) handling equipment
• Sizing of boiler accessories such as burners, fans, blowers, pumps and tanks
• Sizing of combustor for solid fuels.
• Prepares combustion calculation and mass balance.
• Prepares boiler trims.
• Prepares fabrication drawing details and cutting list.
• Prepares bill of materials and cost estimates.
• Computation for customer inquiries validation.
• Conducts site visit and actual testing.
• Analyzes design requirements/specification/parameters.
• Prepares presentation drawings/evaluate drawings.
• Customizes designs and estimates based on client requirements.
• Collaborated with product development team to implement product improvements.
• Diagnosed and resolved client technical problems and system conflicts.
• Trained and supervised new hires, conducts seminar for students. 

• Have designed 10 tons capacity incinerator.
• Have designed waste treatment system facility and its accessories
• Conducts research and development for waste water treatment facility.
• Conducts laboratory experiment and test.
• Prepares drawing details with bill of materials and cost estimates.
• Assist with material purchase and contact possible suppliers.
• Prepares project plan and schedule.
• Prepares progress report of project.
• Conducts supervision and evaluation works of project
• Conducts site visit and ocular inspection of possible clients.
• Teamed with engineering superiors in preparations of project proposal.
• Project in-charge for the construction of new equipment (thermal destruction unit) 

• Evaluation and checking of technical designs for boilers, pressure vessel, solid fuel furnaces, conveyors and other material handling equipment, tanks, pumps , fans and blowers.
• Review of design computations for sizing of equipment, boiler trims, fabrication drawing cutting list and estimates.
• Conducts supervision and evaluation works of project, and scheduled work load for the staff, and making sure to meet the target date as per project required.
• Represents engineering department for meetings in both internal and to customers with engineering manager.
• Prepares fabrication drawing details, cutting lists and as-built drawings.
• Prepares bill of materials and cost estimates.
• Conducts actual checking on fabrication shop.
• Conducts research and products development.
• Conducts site visit and actual testing.
• Diagnosed and resolved client technical problems and system conflicts.
• Trained and supervised new hires, conducts seminar for students. 

• Evaluation and checking of technical designs for boilers, pressure vessel, solid fuel furnaces, conveyors and other material handling equipment, tanks, pumps , fans and blowers.
• Review of design computations for sizing of equipment, boiler trims, fabrication drawing cutting list and estimates.
• Conducts supervision and evaluation works of project, and scheduled work load for the staff, and making sure to meet the target date as per project required.
• Represents engineering department for meetings in both internal and to customers with engineering manager.
• Design and sizing of boilers and pressure vessels, conveyors, material handling equipment, tanks, pumps , fans and blowers.
• Prepares fabrication drawing details, cutting lists and as-built drawings.
• Prepares bill of materials and cost estimates.
• Conducts actual checking on fabrication shop.
• Conducts research and products development.
• System failure analysis and improvement.
• Conducts site visit and actual testing.
• Analyzes design requirements/specification/parameters.
• Customizes designs and estimates based on client requirements.
• Collaborated with product development team to implement product improvements.
• Trained and supervised new hires, conducts seminar for students. 

• Monitors the performance of pump operators and the pump stations operations.
• Daily monitoring of pump logs (i.e., production, pressure, valve adjustment, pump station operations)
• Prepare daily and weekly analysis of pumping station data.
• Report any irregularities found and give recommendations to improve the work process.
• Conducts weekly meetings with Team leaders.
• Prepares plan drawing and material take-off for the modification of pump discharge line for 3 pumping stations.
• Attends meeting and reports weekly and monthly pumping station update for division meeting.
• Prepares schematic flow diagram for the piping arrangement for each pumping station.
• Conducts valve location identification for the entire water distribution. 1|Page

• Leads and supervises job activities of project members from preparation of piping conceptual layout to modelling of equipment, structural and piping items.
• Checking the quality of 3D model if it complies with project specifications, P&ID process requirements and international codes and standards, its constructability and maintainability, well-supported and acceptable in piping stress analysis.
• Preparation and checking of piping deliverables and output like Unit and General Plot Plan, Piping Information to other discipline, Piping Isometric and Plan Drawing, and Piping Material Take-off
• Involve in preparation and checking of stress calculation of piping lines to meet the project requirements
• Assists Project Lead Engineer in man hour estimates, manpower requirements and preparation of project schedule
• Reviews vendor documents from other disciplines which will be use in the preparation of piping layout and design
• Performs vertical type coordination with other engineering disciplines within the organization during detailed engineering stage of the project
• Planning and Controlling of Isometric Drawing production of the area to meet plan schedule

• Responsible for detailed 3D modeling of Piping, Equipment and Structure using 3D software (AutoCAD Plant 3D, PDMS, S3D, E3D and PDS) and 2D drafting tool (AutoCAD)
• Preparation of piping arrangement around process and utility equipment like pumps, vessels and drums, heat exchangers, filters, compressors, tanks, columns and towers, reactors, air fin coolers and cooling towers.
• Preparation of Piping Information needed by other discipline (Civil, Mechanical Static Equipment, Instrument Group, etc.)
• Participate in 3D Model Review with Client
• Preparation of General Plot Plan and Unit Plot Plan
• Preparation of stress sketches for piping stress analysis
• Preparation of Piping Plan Drawing and Piping Isometric Drawing

• Responsible in line checking of installed piping lines prior to pressure testing.
• Checking includes piping installed as per spool drawing, complies with the process requirements indicated in the P&ID, have enough clearance with other installed items at site and completeness of piping items installed.
• Technical assistance to construction activities to ensure high quality output and on schedule
• Prepares Field Change Sheet for any changes in engineering design due to client comments, site conditions or design changes
• Supervises piping spool fabrication and installation, pipe pressure testing, and installation of pipe steam trace and insulation
• Guides, monitors, and supervises fellow piping field engineer in their activities to ensure proper execution and on time
• Monitoring and controlling of piping materials and pipe spools 

• Contracted to do a work from home set up to do professional services as a piping engineer
• Mainly responsible for the piping detailed engineering design of local infrastructure projects
• Preparation engineering drawings needed for construction like Plot Plan, Piping Isometric Drawings and Piping Plan Drawings.
• Prepares detailed piping proposal bill of quantity and bill of materials for bid submissions
• Acts as a Piping Lead Engineer for EPC execution projects
• Prepares schedules, general piping specification and other piping key documents
• Leads fellow piping engineers, material engineer, painting and insulation engineer and mechanical stress engineer in executing projects

• Do freelancing jobs during my vacant time to have a side income and at the same time to gain more
• experience and skills.
• Design and prepares construction drawings needed to upgrade an existing water tank storage and pumping stations for a certain site at Arizona, USA
• Design and prepares drawing needed for material take-off, construction and installation of water treatment package and backwash tanks
• Designs skid packages which will be used as a typical installation of water treatment tanks and backwash tanks
• Does technical evaluation and review of a piping arrangement of firewater pumps
• P&ID drafting and development from markup drawings
• Gives an overview of AutoCAD Plant 3D software to client 

• Performs reports and documents relation to all MEPFP activities as required by the project
• Inspect installation and observe compliance with the design and equipment specification and safety standard.
• Preparing all the tools equipment and materials needed at site.
• Report all the work progress on daily basis and report any issues or clashes other services to the head department for proper solution
• Responsible for Preparing as built drawing for encoding.
• Forward list of required tools and materials to the project engineer for filling of RS.
• Forward list of employee that will render overtime to the project engineer for filling of overtime request.
• Overseeing the quality control and health safety matters on site.
• Preparing report as required.

• Responsible for Preparing for encoding the design in cnc machine.
• Performs reports and documents relation to all the the department concern.
• Inspect installation and observe compliance with the design and equipment specification and safety standard.
• Report all the work progress on daily basis and report any issues or clashes other services to the head department for proper solution

•  In Charge of Checking the proper Installation test inspection and ensuring good working condition of electrical system and equipment based on approved layout /job specification.
• Inspect installation and observe compliance with the design and equipment specification and safety standards.
• Preparing all the tools equipment and materials needed at the site.
• Report all the work progress on daily basis and report any issues or clashes other services to the head department for proper solution
• Forward list of employee that will render overtime to the project engineer for filling of overtime request.
• Over seeing the quality control and health safety matters on site.
• Preparing report as required.

• Review tender drawings and notes all important information.
• Issue enquiries/clarification with necessary attachments to various suppliers for all equipment and follow up. • Tracking quotation confirming correctness and completeness of suppliers offers which includes fixed price/validity/scheduled equipment brochures.
• Manage project files for active contracts including the administration of tender documents, correspondence and all drawings
• Price up projects for Tenders and client quotes.
• Preparing accurate takeoff such cable, Conduit, lighting fixtures power outlets and any other equipment item for Market Tender's and general quoting to clients.

• Overall in charge of Operation. Implementation, Supervision, Coordination, & management.
• Determining the project responsibilities by identifying the project phrase and elements,
• Prepares project status by collecting analyzing and summarizing information and trends
• Maintain project data base by writing computer programs entering and backing data.
• Analyzing blueprints to determine wire lengths as well as suitable outlet placement based on electrical codes.
• Determining the amount, type, and cost of materials and fixtures needed for each electrical project.
• Determining the number of labor hours required to complete each project.
• • Determining the potential profitability of electrical projects to assist management in making sound bidding decisions.
• Providing viable solutions to increase project profitability.
• Completing and submitting competitive project bids in accordance with established guidelines.
• Regularly updating cost databases to accurately reflect fluctuating material and labor costs.
• Evaluating labor and material costs to determine whether it is more feasible to construct electrical components or sub-contract the construction of components. • Designing, & Estimate for all system and quantity take off electrical item.e.g. Cable, Conduit, lighting fixtures, Power outlet and other electrical item.
• Communicating with the clients and their representatives (architects, engineers & surveyor, Including attending regular meeting to keep information of progress and prepares reports.

• Provide accurate take off. All Civil discipline works division all trades, Site works.(Landscape) Concrete, Masonry, Metals, Wood and Plastic, Thermal, Moisture Protection, Finishes (Floor, Ceiling, Wall Partition, Floor Base). Exterior Finishes (skin), Glass, Storefront, Door, Equipment & Specialties, Special Construction, Conveying system, MEP. Within strict deadline for all project.
• Present the prepared numerically and detailed item quantity to the US Estimator. (BOQ).
• Review tender drawings and notes all important information. Review plan as per status of drawings Conceptual, Schematic, Design and for Construction drawing for some major changers.
• Residential, Commercial, and industrial building we are do the take off.
• Can work with minimal supervision. 
• Inputting subcon quote in the master spreadsheet and compare some other quotation.
• Organize the incoming files, drawings, specifications and addendum New Job folder, overlay, RFI, and send invite bid to subcon.
• Analyze blueprint drawings and specification all important information and related documents prior for estimates cost.
• Proficient in using Outlook, Box, Bluebeam, Microsoft office, on screen takeoff (OST) PLANSWIFT and AUTOCAD

• Provide accurate take off for using plan swift software base on given plan & design, Roofing, drywall, doors and windows, Electrical and plumbing.
• Review & analyze drawings and notes all important information. Review plan as per status for Construction drawing for some major changers.
• Presents prepared estimates by assembling and displaying numerical and descriptive information.
• Strong attention to detail and specifications.
• Project handled or Builder are Prime Projects, Homebuyers, Celebrations Homes, Domination Homes, Aussie Living Homes, Now living & Fortitude Living these are all residentials homes.
• Proficient in using Outlook, Box, Bluebeam, Microsoft office, on screen takeoff (OST), Plan swift, Candy CCS estimating and AutoCAD software

• Conducts company visit to promote the product technically
• Coordinates with the Supervisor/Manager with regards the cost and other matters that concerns the project
• Coordinates with the Sales Support Division for the quotation, cutting list, status of production and delivery schedule
• Coordinates with the team on the status of our projects, collaborate ideas on how to increase our sales
• Prepares weekly and monthly report

• Assists Sales Representative with their client’s technical inquiries
• Prepares cost proposal
• Coordinates directly with International Supplier (Humboldt), thru email regarding the technical specifications of equipment and other items (e.g. Universal Testing Machine)
• Conducts product presentation/orientation
• Prepares daily, weekly and monthly report

• Prepares surface development and check if measurements are correct based on the data given by Project Engineer (actual measurement) or Sales Representative (roof framing plan)
• Prepares cutting list of roofing materials, its bended details and estimates hardware accessories
• Coordinates with Project Engineer or Sales Representative if project arises on the project
• Assists Sales Representative with their clients in technical inquiries
• Prepares actual bended detail for approval and sample to be given to client
• Prepares weekly and monthly production writing report
• Occasionally checks the work of my co-employees especially during the absence of my superior

• Conducts actual site inspection
• Preparation of quantity take off (from drawings and specification) as part of the tender documents required
• Preparation of quantities: Preliminaries, Cost Proposal Breakdown and Summary Checking of tender documentations and any irregularities of discrepancies to be brought to the attention of team
• Analyse tenders upon return to ensure complaint bids are received
• Prepares estimate breakdown report subject for approval by the CEO Issue Variation Order as appropriate
• Attend meetings regarding cost negotiation Implement new ideas, methods and continue to seek ways of both improving contribution to the organization’s goals and enhancing the reputation of the company
• Train and guide new member/s of the team.
• Research new ideas on how to do the task more organized. 
• Update cost within the industry standard. 

• Conducts actual site inspection
• Preparation of quantity take off (from drawings and specification) as part of the tender documents required
• Preparation of quantities: Preliminaries, Cost Proposal Breakdown and Summary Checking of tender documentations and any irregularities of discrepancies to be brought to the attention of team
• Analyse tenders upon return to ensure complaint bids are received
• Prepares estimate breakdown report subject for approval by the CEO Issue Variation Order as appropriate
• Attend meetings regarding cost negotiation Implement new ideas, methods and continue to seek ways of both improving contribution to the organization’s goals and enhancing the reputation of the company

• Generate solar production estimates with proprietary software
• Design accurate 2D roof layout (aerial view)
• Generate unique PV system proposal for homeowner and sales representative review
• Create a virtual array of solar panels to match how they are installed on the homeowners rooftop