Engineering delays don’t announce themselves — they accumulate.

• Working as a Site Design Engineer
• In Previous job he handled Motor Control Centers in a Waste Water Treatment plant
• Assigned as a Design Engineer in Sri Lanka 
• Has experience in layout short Circuit Calculation, Short Circuit Calculation Analysis, Lux Calculation,  Genset Required kVA rating, Transformer kVa rating, Capacitor Bank required rating and Voltage Drop Calculation.
•  His Electrical Design Specification are Lighting & Power Layout, Auxillary Layou (FDAs, CCTV, Voice & Data, Etc.,),Cable Tray Layout, Power Receiving & Distribution Layout ,Lighting & Power Schedule of Loads, Lighting & Power Single Line Diagram Electrical Panel Design, Panel Layout and Schedule of Load
• Had an experience doing electrical design in Residential and Commercial Buildings Specifically in condominium.
• Done Electrical system design using Low voltages and high voltages
• Has good communication skills can express himself well

• Milbert has been in the Engineering field for more than 3 years.
• His experience in Engineering include:
  • General estimation 
  • Used Revit in drafting, had a little experience using AutoCAD
  • Project Planning
• He is also an experienced photographer
  • Spearheaded the photoshoot of a Bb. Pilipinas candidate
  • Adept in Adobe Photoshop
  • Knowledgeable in Adobe Lightroom
• He can start immediately

Evaluation Comment

Mark has a solid background in mechanical engineering with experience in both design and project implementation. His expertise in HVAC systems, cooling systems, and mechanical infrastructure is well supported by his advanced technical skills in AutoCAD, material cost estimation, and mechanical design. His hands-on experience in both engineering and project management, combined with a strong understanding of international standards, makes him a well-rounded candidate for roles requiring both technical design and project oversight.

Strengths:

• Strong technical skills in mechanical engineering and design, with advanced proficiency in AutoCAD and cost estimation.
• Extensive experience in designing HVAC and cooling systems for large-scale commercial projects.
• Familiarity with international mechanical and safety standards.

• Mechanical Engineering (Advanced)
• AutoCAD (Advanced)
• Analytical Skills (Advanced)
• Microsoft Office/Excel (Advanced)
• 2D/3D Design (Advanced)
• Material Cost Estimation (Advanced)
• Communication and Critical Thinking Skills (Intermediate)

• Mark is a Mechanical Engineer with more than six (6) years of work experience with specialization on HVAC and fire protection.
• He has good communication skills, very professional.
• His proficiency lies in crafting layouts and blueprints for ventilation, air conditioning, ductworks, chilled water piping, and equipment arrangement.
• Additionally, he possesses skills in space planning and conducting calculations for cooling load, ventilation, air quality, smoke extraction, and more.
• He prepares technical specifications, review and evaluate all submittals which includes quotes and technical documentation of equipment proposals. He also ensures that all documents and design is in compliance with the codes and standards.
• He has contributed to various projects involving offices, residences, commercial spaces, mixed-use buildings, and restaurants, ensuring compliance with relevant codes and standards such as ASHRAE, NFPA, SMACNA, and others.
• He executed tasks related to space planning, calculations (including cooling load, mechanical ventilation, indoor air quality, smoke extraction, stairwell pressurization, fireman’s lift pressurization, etc.), and the layout of mechanical plans. This involved handling equipment and layout configurations, ductworks, refrigerant and chilled water piping layouts, and other mechanical details.
• He gained experience in preparing quotations while managing several projects during his freelance work.
• In his recent role, he collaborated as a cooling estimator with an Australian client, offering engineering assistance for Precision cooling products like CRACs, Chillers, and similar items. His responsibilities included reviewing technical documentation and delivering technically compliant product selections aligned with project requirements. He generated quotations, prepared comprehensive compliance reports, and coordinated with the Business Development Manager (BDM), suppliers, and other team members to stay informed about project status and updates. Additionally, he managed cases within the CRM system.
• He is proficient in using AutoCAD, MS office, Duct sizer, Pipe sizer, HAP-E20, Excel, and Hourly analysis program for précised cooling.
• He can start by January of 2024.

• Detail-oriented and precise; follow-through is deep and literal to ensure tasks were completed in accordance with quality standards.
• Operationally, as opposed to socially, focused. Thinks, in specific terms, about what needs to be done and how to do it accurately and flawlessly; follows, in a literal way, that execution plan.
• Detail-oriented and thorough; works to ensure things don’t fall through the cracks, and follows up to ensure they’re done properly and on time.

• Cristina has been working for more than 10 years as a Quantity Surveyor/Estimator. She has a degree in Civil Engineering,
• She estimates and evaluates the materials needed for the project. She reviews and prepares quotations for pre and post-construction plans. She does daily reports, Job Order and Evaluate Client to Owner Change orders. She has experience with Residential, Commercial, Architectural and Construction Projects. She has background in Waterproofing way back 2017.She is knowledgeable in AU building codes, regulations, and construction practices
• She used the following softwares"
  • Bluebeam Revu
  • V-6 Software
  • e-take off
  • Microsoft Excel
  • Microsoft Dynamic 365
  • Smartbid
• She can Start ASAP  for Full time and part time positions

• Detail-oriented and thorough; works to ensure things don’t fall through the cracks, and follows up to ensure they’re done properly and on time.
• Teaches and shares; often working collaboratively with others to help in any capacity.
• Accommodating; most comfortable working with others, often puts team/company goals before personal goals. Promotes teamwork by actively sharing authority.

Cristina is a very conscientious and disciplined person; particularly careful, thorough, and accurate in their work. She is exacting and strives to produce results that precisely meet the established goals. Works best where there are clear standards, expectations, reporting relationships and measurements for the work. Cristina will depend upon professional training, their own experience, or management leadership, to provide those standards and the structure needed for their work.

Given sufficient experience, She will produce work of high quality, giving close attention to the accuracy of details. She is stable and dependable; consistent in their actions and, if necessary, has sufficient patience to do work of a repetitive nature. She believes in having, and following, well-defined processes and procedures.

• She is a Design Engineer with more than Sixteen (16) years of experience in the Manufacturing Industry.
• She has expertise in equipment, fixtures and molds CAD and 3D Designs.
• She is a project lead wherein she is involved in the following:
  • Coordinating with the clients for requirements.
  • Product Costing and estimation
  • Design and creating mock up
  • 3D Modelling and Fabrication
  • She also supported installation of the actual product.
• She has expertise in using Autodesk Inventor and AutoCAD Mechanical.
• She also has experience in using Vision PC which is a Japanese software for CAD.  
• She can start after 2 weeks.

• John has 14 years of experience comprised of different role in the industrial sector but aligned with Industrial Automation and Process Instrumentation. 9 years of that experience came from manufacturing companies having different positions in engineering department doing maintenance, repairs, and project implementation and  process improvement. Then the rest of his experience came 
  from designing companies and system integration companies that deals with different projects around the world.
• Proficient in the following:
  • Troubleshooting and Repair 
  • Project Management and People Management
  • PLC/HMI Programming (handled Allen Bradley, Siemens and Omron products)
  • CAD (Panel and Wiring Diagram)
  • Process and Procedure Development 
  • Calibration 
  • Software Development Design
• Has worked for an Australian electrical and electronics company where he designed automation control systems.
• Available to start immediately.

• Persistence; consistent pursuit of goals in calm, methodical manner even when setbacks occur. Opinionated; slow to change.
• Casual with rules. Focused on the goal, not how to get there; willing to bend the rules. Delegates implementation details.
• Unworried and unhurried; takes each day as it comes with little planning for what might happen, particularly given the predictable routines that have been established.

Johnquil is independent and individualistic in thinking and behavior. Has strong ideas and opinions and expresses them with confidence and certainty.

Having a willingness to take risk, this individual is likely to develop and act on ideas that are distinctly new or unconventional. This is a creative and nonconformist personality.

In expressing and acting on their ideas, this individual is determined and persistent and has the kind of confidence and nerve involved in initiating innovation or change. Very determined and persistent, once a goal is set they’ll generally push hard to reach it, regardless of the goal’s popularity with others. Undaunted by criticisms or failures.

• Edward worked for over 20 years, earning a degree in Electrical Engineering. 
• He had pieces of training on:
  • Autodesk AutoCAD
  • Programmable Logic Control
  • Sensor Technology Dualtech
  • Electro-Pneumatics Automation
  • Basic Pneumatics Automation
• He prepared a bill of quantities and design drawings for approval of estimated costs for Construction materials, equipment, devices and labor costs.  He attends bid meeting and coordination with clients on projects. He prepares, understands and interprets construction plans, cost estimates, specifications and other contract documents for proper implementation. He prepared quotations from tender documents and generated quotations from price lists. He reviewed the bid documents for electrical and auxiliary layout plans and material specifications. He estimated all the required electrical and auxiliary works. He designed and estimated Electrical and Auxillary systems which included single-line diagrams and layout drawings. He checks for compliance with the requirements of the electrical works, materials, fixtures, equipment and methodologies 

• Christine has more than 8 years of experience as a Quantity Surveyor and Estimator. In her recent employment, they do fit outs for hotels and other commercial establishments. In here, she was doing estimation and material take off for cabinets, flooring and wall panelling. She is using Planswift software for estimation and take off preparation.
• She is proficient in the following:
  • Quantity Surveying and Procurement
  • Preparing of the Cost Estimations, BOM and materials take off
  • Order processing from contacting the suppliers/contractors to checking of the materials
  • Reviewing of the contract, specifications,material take off and payoff quantity.
  • Analyzing the Plans and Checking the plans if it is being followed.
  • Quality assurance and quality control.
  • Preparing the daily report.
• She is proficient in using tools/software like:
  • AutoCAD for design
  • Planswift for estimation
  • MS Office
• She worked with industries like construction and Interior Fit Out provider.
• With her most recent job she also handled projects that include Joinery.
• She is a graduate of Civil Engineering and a board passer.
• She has good English speaking skills.
• A concern is that she will need 15-30 days notice prior to start.

• Formal, reserved, introspective, and skeptical of new people; requires “proof” to build trust in new people.
• Detail-oriented and precise; follow-through is deep and literal to ensure tasks were completed in accordance with quality standards.
• Operationally, as opposed to socially, focused. Thinks, in specific terms, about what needs to be done and how to do it accurately and flawlessly; follows, in a literal way, that execution plan.

Christine Myr is a serious, introspective person and an analytical and disciplined thinker. Careful, thorough and very focused on their responsibilities.
She is reserved and will generally express herself in a factual, direct, and succinct manner. A conscientious person, their approach to the work is systematic, methodical, and well organized, based on thorough knowledge of, and respect for “the book”. Working with factual, technical or detailed information, she’ll produce carefully thought-out work of high quality and precision. Whether doing work herself, or delegating to others, follow up is close to ensure high-quality results.

• Jorelle is a licensed Mechanical Engineer with over 15 years of industry experience, specializing in mechanical design, 3D CAD modeling, and the creation of detailed technical drawings.
• He has worked extensively in the food manufacturing machinery industry, mining equipment design, audio electronics manufacturing, and power plant engineering sectors.
• His academic background includes a Bachelor of Science in Mechanical Engineering from a reputable university in Manila, Philippines.
• Throughout his career, he has contributed to diverse mechanical drafting and engineering projects, including the design and documentation of industrial food processing equipment, mining ventilation systems, and high-volume audio equipment components.
• His work has involved the creation of comprehensive 3D models, part and assembly drawings, layout planning for shipping and installations, and preparation of technical manuals.
• He has also provided design solutions to complex engineering problems, managed CAD libraries, and ensured project deliverables adhered to industry standards and client specifications.
• He demonstrates strong proficiency in mechanical design and drafting, BOM preparation, and GD&T standards.
• He is adept with multiple CAD platforms including Autodesk Inventor, AutoCAD, SolidWorks, and Creo Parametric.
• He also has experience with Autodesk Vault for design data management.
• His skillset supports high accuracy in technical documentation, efficient problem-solving, and collaborative project execution across multidisciplinary teams.