Candidate No. 305076
PLAY AUDIO
Marlon

Engineering

Electrical Engineer

Skills

★★★ Advanced:

PLC Programming, more

★★ Intermediate:

Photo Editing, more

Hourly Rate Gauge

Today's value  AUD $15.53

$13.68

if $ 1 = PHP 42

$17.20

if $ 1 = PHP 30
Currency Fluctuation Range

*includes service fee. Please note that hourly rates are linked to the exchange rate, and fluctuate slightly from month to month.

Employment Preferences

Availability:

 Full Time

Preferred Timezone:

Australian Central Standard Time, Australian Eastern Standard Time

Hourly & Monthly Rate:
(inclusive of service fee)

Full Time: AUD $15.53 per hour or $2692.59 per month

*Plus GST for Australian Businesses
Remote Staff Recruiter Comments
  • He worked as a Project Engineer/Technician.
  • He has more than 10 years of experience in PLC programming and SCADA graphics designing
  • He implemented PLC logic and SCADA graphics for additional projects.
  • He is involved in the integration of VFD to PLC.
  • He supports and guides the maintenance technicians in repairing machines.
  • He has experience in programming PLC logic designing of SCADA HMI graphics that are applied to water pumping stations, Dam intakes, servicing water filtration, facility treatment plant, and sewage treatment plant, PLC programming of automated conveyors and pneumatic lifter,
  • He designs the electrical layout of the motor control system, installation, and repair of electric motors, setup, and configuration of frequency drives, sensors, pneumatic and hydraulic cylinders, and valves.
  • He maintains and repairs hydraulic freight elevator, maintains and repairs hydraulic pumps, implementation of the pre-loop check, and loop check, Implementation of testing and commissioning, and daily visual checkup of all machines.
  • He can start ASAP.
Employment History
Maintenance Technician
Industry:Not ApplicableEmployment Period:April 2000 to December 2005 (68 Months)Duties and Responsibilities:
  • Monitoring and repair of all rotating equipment, freight elevators, hydraulic and pneumatic mechanical system and its electrical control system.
  • Monitoring and repair conveyors and electric motors, conduct day to day visual checkup of all the machine in the plant, record all the status of machines according to standard operating procedure.
Maintenance Technician
Industry:Manufacturing / ProductionEmployment Period:November 2006 to November 2009 (36 Months)Duties and Responsibilities:
  • Programming of PLC logic of refurbished machines such as conveyors system, pallet machines, unloading machines, pick and place machines, cutting machines sorting conveyor, overhead electrical hoist and hydraulic freight elevators up to third floor
  • Design electrical layout of motor control system, installation and repair of electric motors, setup and configuration of frequency drives, sensors, pneumatic and hydraulic cylinders, and valves
  • Maintain and repair of hydraulic freight elevator, maintain and repair hydraulic pumps, implementation of pre-loop check, and loop check, Implementation of testing and commissioning, daily visual checkup of all machines
  • Fault finding and repair
Instrumentation and Control Technician
Industry:Construction / Building / EngineeringEmployment Period:November 2009 to May 2010 (6 Months)Duties and Responsibilities:
  • Maintain process instruments by conducting daily visual checkup
  • Fault finding and repair, replace instrument if necessary
  • Maintain conditions of shaft conveyors and air conveyors, maintain and repair frequency drives,
  • Maintain and repair of both pneumatic and hydraulic system of conveyors, setup and configuration of drives if replace, control system diagnostics of all automated conveyors,
  • Modify and reconfigure PLC logic and configuration if required
Automation Engineer
Industry:Not ApplicableEmployment Period:May 2010 to October 2011 (17 Months)Duties and Responsibilities:
  • Programming of PLC logic designing of SCADA HMI graphics that applied to water pumping station, Dam intakes, servicing water filtration, facility treatment plant, and sewage treatment plant, PLC programming of automated conveyors and pneumatic lifter,
  • Provide guideline documents such as instrument datasheets, certificate of calibration, loop drawings cable schedule or wiring interconnection,
  • Provide general arrangement drawing, provide operational guideline and implementation of factory acceptance test, site acceptance test, implementation of pre loop check and loop check, implementation of pre startup and startup, implementation of  pre commissioning and commissioning test, repair and configuration of electric motor drives
Control System Engineer/Technician
Industry:Oil / Gas / PetroleumEmployment Period:November 2011 to June 2013 (19 Months)Duties and Responsibilities:
  • Programming of PLC logic and design DCS HMI graphics of ESD and Fire and Gas system using Honeywell Fail Safe Controller and Safety Manager, Experion PKS
  • Provide cable schedule for all instrument and equipment, provide loop drawings, and operation manual, provide general arrangement of control system and marshalling cabinet, implementation of Factory Acceptance Test, and Site Acceptance Test, Implementation Pre - commissioning and Testing and Commissioning,
  • Implementation of Loop check, field calibration and servicing, fault finding and repair supervising the installation of transmitter, review and modify loop folder
Instrumentation and Control Engineer/Technician
Industry:OthersEmployment Period:July 2013 to March 2016 (32 Months)Duties and Responsibilities:
  • Implementation of testing and commissioning of DCS system, HVAC system, Air compressor system, flow metering skid, Emergency Shutdown Valves
  • Implementation of pre startup and startup of the machines, implementation of Pre-loop checked and loop check, setup and configuration of motor drives,
  • Installation, configuration and repair of field instrument, review and modify loop folder if necessary, provide supporting documents of the system and instrument, prepare materials for turn over
Control System Engineer
Industry:Not ApplicableEmployment Period:September 2017 to December 2017 (3 Months)Duties and Responsibilities:
  • Implementation of Control Philosophy to PLC programming and SCADA graphics designing
Project Engineer/Technician - Maintenance Automation
Industry:Manufacturing / ProductionEmployment Period:September 2018 to September 2020 (24 Months)Duties and Responsibilities:
  • Implementing of PLC logic and SCADA graphics for additional project in the factory
  • Integration of VFD to PLC, with deep knowledge in installation and configuration of drives such as Powerflex, Micromaster Fui, Mitsubishi, Danfoss, etch.
  • With deep knowledge of AB. RsLogix 5000 and Studio 5000, Siemens Simatic Manager and TIA, with deep knowledge in Mitsubishi Gx Developer
  • Prepare technical guidelines for the project, prepare bill of materials including drawings up to Testing and commissioning, revamping of obsolete systems
  • Support and guide maintenance technicians in repairing of breakdown machines, responsible of PLC diagnosis, Servo drives fault finding and repair and configuration
Education History

Field of Study:

Engineering (Electrical/Electronic)

Major:

SOFTWARE/HARDWARE EXPERTISE

Graduation Date:

April 1999

Located In:

Philippines

License and Certification:

Not Applicable

Skills

★★★ Advanced:
PLC Programming

★★ Intermediate:
Photo Editing

Work at Home Capabilities

Internet Bandwidth:

100 Mbps and above

Working Environment:

Private Room

Speed Test Result:

Not Applicable

Internet Type:

Fiber

Hardware Type:

Laptop

Brand Name:

HP

Processor:

Intel Core i7

Operating System:

Windows 10