Hire World-Class, High Performing, Vetted Engineers.
Cut Labor Costs by 70%

Project Manager (May 2021 - Present) 

Project Planning & Coordination:

• Develop project plans, schedules, and budgets; 
• Define project scope, goals, and deliverables; 
• Coordinate with Owner, engineers, and sub – contractors;

Budgeting & Cost Control:

• Prepare and manage project budgets; 
• Track project expenses and identify cost-saving opportunities; 
• Negotiate contracts with vendors and subcontractors;

Scheduling & Resource Management:

• Develop and maintain project timelines; 
• Allocate resources efficiently, including labor, materials, and equipment; 
• Adjust schedules as needed to meet deadlines;

Compliance & Safety:

• Ensure compliance with building codes, permits, and regulations; o
• Implement and enforce safety protocols on-site; 
• Conduct risk assessments and resolve any potential issues;

Team Leadership & Communication:

• Supervise and coordinate work among project teams; 
• Provide guidance and problem-solving support to team members;
• Maintain clear communication with clients, stakeholders, and regulatory agencies;

Quality Control & Reporting:

• Monitor project progress and ensure work meets quality standards; 
• Prepare and submit project status reports; 
• Address and resolve project issues or delays;

Project Assignments:

June 1, 2021 – November 30, 2021
Project Name: Brentville International Arborage B - Site Development and Site Electrical
Total Lot Area: 3.95 Hectares Location: Brgy Mamplasan, Biñan,Laguna
Developer: FILINVEST DEVELOPMENT CORPORATION

June 1, 2021 – June 30, 2023
Project Name: Vireya Phase 3 Site Development and Site Electrical Development
Total Lot Area: 3.95 Hectares
Location: Tagaytay Midlands, Tanauan, Batangas
Developer: HIGHLANDS PRIME INC. – SM PRIME INC.

May 2, 2022 – March 15, 2024
Project Name: Rosewood Place Land Development Works
Total Lot Area: 15.9 Hectares
Location: Brgy. Hugo Perez, Trece Martires, Cavite
Developer: FILINVEST DEVELOPMENT CORPORATION

June 4, 2023 – September 2023
Project Name: Construction Of Six (6) Mock Up Units Model Abegail
Location: Brgy. Hugo Perez, Trece Martires, Cavite
Developer: FILINVEST DEVELOPMENT CORPORATION

August 7, 2023 – Present
Project Name: Construction Of Three Hundred (300) Housing Units Model Abegail - Rosewood Place Phase 1c
Location: Brgy. Hugo Perez, Trece Martires, Cavite
Developer: FILINVEST DEVELOPMENT CORPORATION

October 4, 2023 – February 29, 2024
Project Name: Construction of Silt Pond
Location: Greenlands Community, Tagaytay Midlands, Tanauan, Batangas Developer: HIGHLANDS PRIME INC. – SM PRIME INC

October 28, 2023 – December 1, 2023
Project Name: REBCOR Batching Plant 2 Silo
Location: Brgy. Hugo Perez, Trece Martires, Cavite

• Quantity Take off Estimate 
• Preparing Project Schedule 
• Preparing Project Manpower Schedule 
• Preparing Project Equipment Schedule 
• Site Monitoring and Supervision 
• Manpower Monitoring and Supervision 
• Equipment Monitoring and Supervision 
• Project Accomplishment Evaluation 
• Preparation of Progress Billing 
• Sub-contractor Billing Evaluation 
• Documentations 
• Preparing of As-built and Shop drawings

Project Assignments:

May 17, 2020 to March 26, 2021
Project Name: Idesia Dasmariñas Phase 1 Land Development Works
Total Lot Area = 11.07 Hectares
Location: Brgy San Agustin, Langkaan, Dasmariñas, Cavite
Developer: P.A. PROPERTIES – HANKYU ONE, INC

May 17, 2020 to April 30, 2021
Project Name: Idesia Dasmariñas Access Road Sector 1 Land Development Works
Total Road Length: 0.611 Km
Location: Brgy San Agustin, Langkaan, Dasmariñas, Cavite
Developer: P.A. PROPERTIES – HANKYU ONE, INC.

May 17, 2020 to July 21, 2021
Project Name: Idesia Dasmariñas Access Road Sector 2 Land Development Works
Total Road Length: 0.746 Km
Location: Brgy San Agustin, Langkaan, Dasmariñas, Cavite
Developer: P.A. PROPERTIES – HANKYU ONE, INC.

Dec 21, 2020 to April 30, 2021
Project Name: Vireya Phase 3 Site Development and Site Electrical Development
Total Lot Area: 3.95 Hectares
Location: Tagaytay Midlands, Tanauan, Batangas
Developer: HIGHLANDS PRIME INC. – SM PRIME INC.

• Site Monitoring and Supervision 
• Manpower Monitoring and Supervision 
• Equipment Monitoring and Supervision 
• Quality Assurance 
• Documentations 
• Preparing of As-built and Shop drawing

PROJECT ASSIGNMENTS:

January 16, 2019 to May 16, 2020
Project Name: Idesia Dasmariñas Phase 1 Land Development Works
Total Lot Area: 11.07 Hectares
Location: Brgy San Agustin, Langkaan, Dasmariñas, Cavite
Developer: P.A. ALVAREZ PROPERTIES AND DEVELOPMENT CORPORATION

April 28, 2019 to May 16, 2020
Project Name: Idesia Dasmariñas Access Road Sector 1 Land Development Works
Total Road Length: 0.611 Km
Location: Brgy San Agustin, Langkaan, Dasmariñas, Cavite
Developer: P.A. PROPERTIES – HANKYU ONE, INC.

November 7, 2019 to May 16, 2020
Project Name: Idesia Dasmariñas Access Road Sector 2 Land Development Works
Total Road Length: 0.746 Km
Location: Brgy San Agustin, Langkaan, Dasmariñas, Cavite
Developer: P.A. PROPERTIES – HANKYU ONE, INC.

• Authored environmental monitoring reports (e.g. air, water, soil, and workplace environment), evaluated sampling results and devised solutions to adhere to internationally allowable air, water, soil and workplace conditions. 
• Conducted site inspections and internal audit on sampling activities, ensuring that proper protocols and processes are being followed.

• Reviewed client Invitation to Bid (ITB), interpreted project requirements and determined project alternatives, exceptions, and clarifications. 
• Headed Client and Vendor Meetings to ensure technical and commercial terms are agreed upon. 
• Capitalized on knowledge of various package equipment and industry codes, standards, and practices (ASME, ASTM, Saudi Aramco Specifications and Standards, Shell DEPs, Petronas Technical Standards, etc.) to recommend the most suitable equipment in line with customer requirements thereby saving time and expenses in the long run. 
• Produced the most cost-effective and safest solutions on project design through technical coordination with stakeholders and evaluating vendor’s technical and commercial proposals. 
• Assisted in quality control-related activities such as pre-inspection meeting, final inspection, and factory acceptance tests. 
• Mitigated equipment fabrication, construction errors and nonconformance through vendor equipment document review prior to fabrication and delivery. 
• Inspected vendor shops, troubleshoot issues and devised solutions encountered during fabrication, delivery, installation and/or commissioning phase to comply with the procedure. Met with vendor managers and engineers to expedite delivery. 
• Ensured design accuracy and regulatory compliance by keeping up with industry policies and procedures. Ensured project’s adherence to industry standards and department practices. 
• Prepared equipment design manual for the System Equipment Section, focusing on reliability and efficiency and ensuring that readers can understand the manual.

• Provided timely and accurate application, proposal, and technical support to the PCV (Pumps, Cyclones and Valves) sales channels to meet business goals even in quick turnarounds and tight deadlines, when required. 
• Ensured that proposals submitted are aligned with project strategies and formatting guidelines. 
• Interprets customer specifications and assists on the determination of accurate and efficient customer solutions. Coordinates and implements strategies with sales, engineering, and product planning departments for customer equipment configurations. 
• Drew up equipment recommendations and proposals including slurry pump and motor sizing and cyclone simulation. 
• Reviewed products and parts inventory, arrange expediting activities with purchasing team, when needed, to achieve customer requirements for delivery schedule. 
• Generated cost estimates for proposal activity. 
• Support the Engineering Team with the development of the cost, customers and supplier databases, pricelist, and libraries. 
• Carried out regular follow ups by using and updating and maintaining the Proposal Logs and ISS tool. 
• Clarified subsequent purchase order receipt and to prepare detailed order handover documentation in a timely manner for contract engineers to execute the contract. 
• Worked closely with vendors/suppliers to provide an optimum solution. 
• Assisted regional salespeople from North America, Europe, Asia Pacific, India, South Africa and Middle East with technical requirements and entry documents as needed. 
• Initiated the creation of Inside Sales Manual by consolidating existing manuals and establishment of department processes to simplify proposal preparation, to aide seamless project turnover, and to understand purpose of department activities.

• Support the Pursuit Leads and coordinate the full proposal lifecycle, including capture planning, compliance checks, content development, editing, and submission of EOIs, RFQs, and RFPs for high-value infrastructure projects across the UK. 
• Work closely with the UK Strategic Pursuit Team and Bid Managers to assist in defining proposal strategy, developing win themes, and ensuring alignment with client expectations. 
• Arrange proposal planning meetings, establish timelines, assign responsibilities, and ensure deadlines are met without compromising quality. 
• Conduct thorough review of proposal requirements and provide guidance on risk mitigation and compliance. 
• Serve as the point of contact across departments—coordinating with marketing, HR, finance, legal, and technical teams to gather necessary content and approvals. 
• Apply customized proposal templates and coordinate visual layout and branding using tools such as Adobe InDesign and MS Word and ensure brand consistency. 
• Perform content editing and proofreading to enhance clarity, coherence, and persuasiveness of proposal responses. 
• Conduct gateway and color team reviews, capture lessons learned and implement process improvements in proposal management workflows. 
• Participate in client development meetings across multiple geographies and sectors, supporting pipeline generation and long-term client relationship goals.

Estimator under NORTH, Australia based medium sized construction company concentrating on aged care, health, education, and commercial sector.

• Quantity take-off for architectural finishes, joinery and FFE, landscape, civil works/bulk earthworks, structural concrete and structural steel using Cubit Estimating Software and Mudshark. 
• Directly communicate queries to client in early stage of measurement to meet deadlines, ensuring that tender documents are reviewed and considered in BOQ. 
• Reviews issued plans, reports, and general specification documents, to identify inconsistencies that might affect the pricing of BOQ. 
• Prepares documents that the client will review to ensure that tender schedules are followed, and critical information or description of material/work were considered in BOQ.

Estimator assigned to Jeds Project Pty Ltd., handling client from Australia, measuring most building types including, but not limited to: Highrise residential towers, commercial offices, refurbishments, health, education and sports precincts.

• Prepare take - off and BOQ master filing for input of cost under the following trades using RIB CostX and Cubit Estimating Software: Architectural finishes which include wall types, external and internal wall finish, floor finishes, ceiling finishes, metalworks, roofing, conforming with specification, finishes schedules and project design reports, Joinery & FFE, Landscape and civil works,  Structural concrete, Structural steel
• Reviews issued plans to provide variation order quantities for previously awarded project. 
• Issues queries to the client, particularly tagging mismatch to the schedule of finishes provided and inconsistencies of general plans to room data lay-out. 
• Reviews general specification for each trade and design reports to incorporate in workbook. 
• Bulk check measurement and plan marking up to ensure that all areas needed are measured and specific descriptions are included to workbook before submission of final output to the client.

One Ayala Project:

• Reviews issued plans for One Ayala project, an international project joint venture by Makati Development Corporation (MDC) and Bouygues Batiment International (BBI) now MDBI, specifically bid plans and construction bulletins to identify changes that requires cost proposals including site instructions whether additive or deductive on the original awarded contract. 
• Negotiates submitted cost proposals with owner’s and general contractor’s representative to reach profitable agreement. 
• Handles the preparation and processing of monthly progress billing documents for five different contract packages under plumbing/sanitary works and fire protection works which are monitored using Procore management software. 
• Monitors project progress through monthly accomplishment report based on the actual installed materials and equipment through Procore management software. 
• Prepares and evaluates the weekly progress billing of subcontractors prior to approval of payment.

Newport PP3 Project 

• Ensured sufficient supply of materials for Newport PP3 Project expansion phase 3 of the Resorts World Manila composed of Okura Hotel, Sheraton Hotel and Hilton Hotel to prevent delay of work by coordinating with the project coordinator and purchaser the schedule and quantity of materials to be delivered. 
• Monitored delivered and pulled out materials at site through monthly inventory which helps the team in identifying whether some materials have exceeded or not in the awarded quantity which may affect the allocated budget per contract package.

• Collaborates with the team to face technical challenges and come up with creative solutions. 
• Assists with cost estimation and budget management. 
• Develops project plans, illustrations, and specifications. 
• Reviews and analyzes data to establish project viability and feasibility.
• Assists senior engineers with project planning and design.

• Organize and maintain electronic files for project documents, contracts, and client communications. 
• Coordinate and schedule meetings, site visits, and appointments with clients, contractors, and suppliers, ensuring seamless calendar management. 
• Uses Canva in creating marketing designs for advertisement.
• Assists in the preparation of bidding documents and contract documents according to the FIDIC, international, and local laws and regulations. 
• Prepare, review, and manage project documentation, including drawings, specifications, and reports. 
• Act as a liaison between the engineering team, clients, contractors, and other stakeholders.
• Coordinate project schedules, track progress, and facilitate communication. 
• Manage the distribution of documents to relevant parties, both internal and external, ensuring they receive the correct and most recent versions. 
• Develop and maintain strong relationships with existing clients while identifying and reaching out to potential new clients. 
• Create accurate and detailed technical drawings and plans using CAD software.
• Prepare layouts, schematics, and diagrams for construction projects.

• Assists in the planning and development of civil engineering projects, conducts site investigations, analyzes data, and prepares reports. 
• Create accurate and detailed technical drawings and plans using CAD software.
• Prepare layouts, schematics, and diagrams for construction projects. 
• Creates a detailed entry of receipts for liquidation. 
• Assists with cost estimates for the supplies, labor, and equipment needed for building projects.
• Going over the project requirements, performing quantity takeoffs, as well as taking the project's scope and the site's conditions into consideration.

• Create designs, calculations, and drawings for transportation projects, buildings, and other infrastructure.
• Create plans for construction and maintenance projects.
• Oversee the construction and operation of projects.
• Perform engineering calculations and cost estimates
• Projects Roads, bridges, and other transportation projects Buildings, an-ports, and other municipal construction.

Austrailian Construction Company

• Prepares material (floor covering, wall covering, fit-out, roofing, painting, electrical, rebars) estimates for construction by studying plans and specifications.
• Analyze requirement documents, blueprints and project plans to gain a thorough understanding of the project.
• Clarify the client's needs and expectations. 
• Read blueprints and take measurements using Bluebeam / Planswift.
• Prepare and submit quotations.
• Present prepared estimates to management and other stakeholders.

• Cost estimation and budgeting.
• Providing accurate take off, bill of quantities and quotation.
• Assessment of blueprints from tendering process to final update of plans.
• Estimation of Carpentry works such as (but not limited to) ceiling works, partitions, doors, windows, millworks.
• Exposure to different materials used for specialty items.
• Coordination with supplier to provide competitive quotes.

• Crafting high-quality beverages according to company standards, providing exceptional customer service without compromising quality
• Refined planning and organizational skill

• Create material take off and estimates for Striping, Pavement.
• Markings and Signages using Bluebeam Revu and AutoCAD.
• Manage bid proposals and bid schedules using Microsoft Excel and Google Sheets.
• Analyze project specifications, addendums, RFI’s to determine cost and material needs 
• Create Change Orders if needed.

• Create material take off and estimates for Residential and Commercial Structures using Bluebeam Revu and AutoCAD.
• Create Bill of Quantities using MS Excel.
• Perform site inspections and assessments to gather data for estimates
• Review architectural plans and specifications for accuracy.
• Prepare detailed bid submissions and documentation for project proposals.

• Create Material Take Off and estimates using Stack Software, Bluebeam, Microsoft Excel, Smartsheet, Google Sheets and AutoCAD.
• Review Addendum, RFI, Specifications and other documents for scope of work and takeoff.
• Project Management, monitoring, and documentation. 
• Coordinate with General Contractors or clients for inquiries regarding projects.

• Process permits for ADU’s in the state of California and Texas.
• Prepare drawings and other requirements for building, fire, sewage and water permit approval. 
• Prepare Bill of Materials and Bill of Quantities for bidding and estimating purposes.
• Prepare drawings and plans using AutoCad for permit approval.
• Create a data base (Smart sheet) regarding regulations in CA. 
• In charge of Planning and Scheduling of Materials and Manpower.
• Monitor and create Change Orders. 
• Estimates and reviews plans for Bill of Quantities and Change Orders. 
• In charge of Material Take offs.

• In charge of project management and supervision.
• Provided / created bill of quantities and bill of material used to bid for the projects mentioned above.
• Produce cutting list and material estimates using AutoCad, Staad pro and MS Excel (Value Engineering) for every material to be used on site to minimize waste.
• Handle/manage the work load and distribute it to all sub-contractors.
• Create weekly accomplishment billing report for all sub-contractors.
• Create an accomplishment billing report for client/owners’ reference.
• Managed, supervised and handled a total of 200 employees and 13 subcontractors.
• Liaison officer between client/s and company.
• Created project schedules and manhours to ensure that the target date of completion is on time.
• Supervising the structural and architectural designs on site to make sure that the theories and plans are being applied.

• In charge of structural modeling and analysis using STAAD Pro and SAP
• Designing steel and reinforced concrete structures using RCDC and STAAD Pro software
• Preparation of drawings using AutoCAD
• Conduct site inspections to ensure compliance with design specifications
• Coordinate with cross-functional teams to integrate structural designs with other engineering disciplines

• Reviewed project documents, specifications, and drawings to define scope and requirements.
• Performed quantity take-offs and developed detailed Bills of Quantities (BOQ).
• Reviewed and validated take-offs completed by Assistant Estimators for accuracy.
• Prepared pricing, cost breakdowns, and applied mark-ups to develop comprehensive bid proposals.
• Presented completed BOQs and bid proposals to the Estimating Manager for review and approval.
• Identified risks, considered alternatives, and developed cost strategies to ensure competitive bids.
• Led the tender process and maintained accountability for the accuracy, completeness, and timely submission of final estimates.

• Prepared detailed and accurate cost estimates for refurbishment, house extension, and loft conversion projects, ensuring alignment with client requirements and project scope.
• Produced quick-turnaround estimates for maintenance works to support timely client decisions and project scheduling.
• Provided regular financial reports and updates to clients, identifying potential risks and issues that could affect project costs or timelines.
• Produced comprehensive cost reports, including budgets, change orders, and cost analyses to support informed decision-making.
• Developed and standardized templates using MS Office Suite, Google Workspace, and Canva, streamlining documentation and ensuring consistency across processes.

• Develop detailed cost estimates for all materials, labor, and equipment required for projects.
• Analyze project specifications and drawings to determine accurate material and labor requirements.
• Collaborate with project managers, engineers, and designers to ensure realistic project budgets and timelines.
• Prepare comprehensive cost reports, including budgets, change orders, and cost analysis.
• Monitor project expenditures and ensure compliance with approved budgets.
• Assess, evaluate, and price variation orders for civil works, architectural finishes (painting, cladding, ACP/facade systems), and specialty metal works.
• Prepare and process project billings for submission to clients for review and approval.

• Supervise the construction of a 2-storey house
• Estimate the costs associated with the construction project. This includes materials, labor, equipment, and other expenses.
• Create and manage the budget for the construction project. This involves monitoring costs and ensuring that the project stays within the allocated budget.
• Provide input on value engineering, finding ways to optimize costs without compromising the quality of the construction.

• Generate forecasts on matters such as budget and cash-flow.
• Create Work Schedule and S-Curve for projects
• Evaluate quotations from subcontractors and suppliers
• Assists in the preparation of contract and tender documents
• Identify potential cost-saving measures and make recommendations to improve project efficiency

• Monitors and allocates budget for the materials needed on site.
• Arrange payments for subcontractors and suppliers
• Conduct evaluation on Contract Variation Claims by subcontractors
• Assists in monitoring site accomplishment and ensures completion of the project on the given timeline.

• Managed projects and workflows using ServiceM8 and ClickUp to coordinate tasks, track progress, and ensure timely completion.
• Handled email management and maintained efficient communication across teams and clients.
• Organized and maintained executive calendars, scheduling meetings and managing appointments.
• Processed invoices and supported financial tracking using Xero, Payment Logic, and related tools.
• Managed and optimized Google Business Profile to improve visibility and client engagement.

• Used PlanSwift software to accurately mark-up plans, including adding dimensions, measurements, and annotations to plans for painting projects.
• Prepared detailed and competitive cost proposals using Estimate Rocket, incorporating materials, labor, overhead costs, and contingencies.
• Maintained clear, professional communication with clients using Slack, addressing inquiries, providing project updates, and discussing any scope changes or issues.

• Australia Firm (NSW)
• Prepare and coordinate high quality and accurate tender proposals and submissions.
• Source and collate suppliers and contractor quotes.
• Effectively evaluate tender specification & review plans & review plans & drawings.
• Prepare cost plans, budget and detailed estimates.
• Measure and calculate the cost of materials and work.

 

• Australia Firm (NSW)
• Read plans scope of works and provide accurate take off projects.
• Coordinate with suppliers and subcontractors to request quotes and gather pricing rates and subcontractor services.
• Assist in the estimating projects quantities and cost identifying tender schedule discrepancies and ensure timely estimate completion.
• Maintain and update cost databases to accurately reflect fluctuating material and labor cost.

Australia Firm (NSW) Read plans scope of works and provide accurate take off projects. Coordinate with suppliers and subcontractors to request quotes and gather pricing rates and subcontractor services. Assist in the estimating projects quantities and cost identifying tender schedule discrepancies and ensure timely estimate completion. Maintain and update cost databases to accurately reflect fluctuating material and labour cost.

• Create precise and innovative kitchen layouts using computer-aided design (CAD) software, ensuring optimal space utilization, functionality, and aesthetic appeal.
• Collaborate with clients to understand their requirements, preferences, and budget constraints, translating their vision into tailored kitchen designs.
• Recommend materials, finishes, and appliances that align with the client’s style and functional needs while staying within budget guidelines.
• Prepare and present detailed technical drawings, 3D renderings, and project documentation to ensure clear communication with clients and contractors.
• Work closely with contractors, suppliers, and installers to ensure seamless execution of designs, addressing any on-site challenges.

• Collaborate with engineers and architects to develop detailed drawings and designs based on initial sketches and specifications.
• Assist in the conceptualization and development of product designs, integrating advanced engineering and manufacturing techniques to ensure functionality and efficiency.
• Apply knowledge of building standards, codes, and techniques to enhance architectural plans and ensure compliance with industry regulations.
• Create precise and comprehensive technical drawings and blueprints using computer-aided design (CAD) software.
• Conduct regular reviews and updates of designs to reflect modifications or new project requirements.
• Coordinate with project managers, contractors, and other stakeholders to ensure accurate interpretation and execution of designs.
• Research and incorporate sustainable and innovative building materials and methods into design plans.
• Prepare documentation and reports, including design specifications, cost estimates, and project timelines.
• Collaborate in the resolution of design-related challenges, ensuring optimal solutions that meet client and project needs.

• Provide accurate and detailed cost estimates at various stages of the project lifecycle, including schematic design, budgetary phases, detailed take-offs, and final pricing.
• Review electrical plans, specifications, and other project documents to determine material, labor, and equipment requirements.
• Develop competitive bid proposals by analyzing scope, assessing project risks, and incorporating market trends.
• Update and maintain a database of cost data, historical project information, and unit pricing to streamline future estimating processes.
• Obtain and evaluate quotes from suppliers and subcontractors to ensure accuracy and cost-effectiveness.
• Provide value engineering options to optimize costs while maintaining project quality and compliance.

• Analyze and interpret electrical plans and blueprints to extract project requirements and specifications.
• Utilize AutoCAD and Simpro software to generate detailed and accurate project take-offs, ensuring all electrical components are accounted for.
• Prepare comprehensive cost estimates, including labor, materials, and equipment, based on project scopes and client needs.
• Collaborate with project managers and engineers to refine estimates and ensure alignment with project goals and timelines.
• Identify cost-saving opportunities and propose value-engineering solutions without compromising project quality.
• Maintain up-to-date knowledge of electrical codes, industry standards, and emerging technologies to support accurate estimations.
• Develop and manage project schedules and timelines, ensuring adherence to deadlines and resource allocation.
• Present estimates and proposals to clients, providing clear justifications and addressing inquiries professionally.

• Provide and/or revise electrical costs and estimate and submit tender and price jobs and/or work orders completed by the contractor 
• Review electrical plans and photos related to completed work orders. 
• Manage and use of CRM and Project management software. 
• Create excel and establish database on projects if necessary.
• Liaise with HIA Electrical multiple suppliers for tender pricing.
• Submit Invoices within time frame and meet KPI. 
• Making design modifications using Helioscope as needed.
• Developing system processes if necessary. 
• Undertake any additional responsibilities assigned by the Management periodically.

• Responsible for a broad range of tasks, including but not limited to providing technical and administrative support for the entire technical team. 
• Coordination with different manufacturers, suppliers, installers, design and sales teams, clients, and other involved parties.
• Managing and overseeing warranty claims completion, including but not limited to replacement of units, redesign of the whole system, assessment of the system, system upgrades, cost estimates, and coordination with all involved parties. 
• Providing technical support to all customer cases 
• Remotely troubleshooting and re-configuring old and new solar systems using various software provided by our suppliers and/or manufacturers. 
• Making design modifications using Helioscope as needed.
• Revising costs and estimates using NetSuite as needed.
• Developing system processes for the Technical Division Team using System Hub. 
• Undertake any additional responsibilities assigned by the Management periodically.

• Provide technical guidance and professional support to subcontractors involved in the design, installation, and energization works of solar photovoltaic systems and electrical distribution facilities before commencing work. 
• Design appropriate equipment and materials for rooftop photovoltaic systems by means of specialized computer programs like CAD/ Helioscope. 
• Provide technical expertise to resolve any potential technical issues that may arise during the implementation phase of the project. 
• Work closely with contractor to ensure that the solar photovoltaic systems and/or electrical distribution facilities are installed correctly and energized to meet the client's requirements and expectations.
• Ensure the safe, efficient, and completion of the project in compliance with industry (Grid) standards and regulations from conception to completion, including billing and turn-over. 
• Identify and manage potential risks associated with client projects.

• Implement, monitor and coordinate the installation, replacement, relocation, and retirement of Meralco’s revenue meters and metering facilities. 
• Execute technical and operational tasks associated with revenue metering. 
• Oversee and manage teams in construction, maintenance, operations, and metering services from the time of project awarding to completion, including billing and turnover completion. • Ensure that all projects adhere to the Client's authorized construction methods and standards. 
• Develop and execute a detailed project plan, standards, and procedures to enhance cost effectiveness, efficiency, quality, and timely delivery of project results. 
• Data analysis and interpretation for project’s profit and loss.  Conduct risk management to mitigate project risks. 
• Manage employees to ensure they are knowledgeable of all quality standards, adhere to quality manuals and procedures, and collaborate with contractors and suppliers to uphold the quality of all systems. 
• Aid in conducting employee performance appraisals, making recommendations for promotions and compensation, and facilitating employee terminations based on performance review.
• Undertake any additional responsibilities assigned by the Management periodically

• Managing and interpreting client’s requirements. 
• Negotiating tender and contract terms. 
• Negotiating and closing sales by agreeing terms and conditions.
• Working with clients and contractors to ensure project requirements, standards, specifications, and procedures are met from start to finish. 
• Collaborating with various teams, such as engineering, design, vendors, and maintenance, to conduct audits, tests, and inspections. 
• Conducting cost and sales analysis. 
• Providing after-sales supports by offering beneficial solutions for clients.

• Turn-over system, tracking and reporting by means of data base use for the completion system of the project. 
• Preparation and control and management of punch list documentation for electrical and instrument modules. 
• Preparation and compilation of turn-over packages, commissioning, and pre-commissioning dossiers by gathering all necessary documents, including single line diagrams, loop diagrams, cable schedules, manufacturer’s manuals, equipment data sheets, and vendor’s drawings. 
• Coordinating with various teams and disciplines involved in the project.

• Responsible for quantifying and preparing the bill of quantities.
• Prepares competitive budgetary and cost proposals.
• Submits alternative solutions and value engineering proposals.
• Secures quotations from various approved subcontractors/suppliers and prepares cost comparisons or unit price analyses.
• Assists with project site requirements and closes subcontractors'/suppliers' accounts.
• Requests new subcontractors/suppliers to complete all prequalification requirements.
• Updates the list of approved subcontractors/suppliers.

• Responsible for procuring materials prior to the start of each project.
• Coordinates effectively with clients' representatives.
• Sets out works in accordance with project drawings and specifications.
• Inspects materials and work in progress to ensure compliance with specified requirements.
• Supervises site activities with strict adherence to safety requirements.
• Maintains a clean and safe working environment by enforcing procedures, rules, and regulations for site supervision.

• Attended pre-bid meetings and site inspections prior to bid tender preparation.
• Responsible for quantification and preparation of the bill of quantities.
• Secured quotations from various approved subcontractors/suppliers and prepared cost comparisons or unit price analyses.
• Assisted with project site requirements and closure of subcontractors'/suppliers' accounts.
• Prepared shop drawings for client approval.
• Procured and checked materials required on-site before pick-up or delivery.
• Coordinated with clients' representatives for project requirements and updates.
• Set out works in accordance with project drawings and specifications.
• Inspected materials and work in progress to ensure compliance with specified standards.
• Supervised site activities with strict adherence to safety protocols.
• Maintained a clean and safe working environment by enforcing procedures, rules, and regulations for site supervision.

• Attended pre-bid meetings and site inspections to assist in the preparation of project costing.
• Responsible for costing and the preparation of the bill of quantities.
• Created shop drawings for client approval.
• Coordinated effectively with clients' representatives for project alignment.
• Prepared write-ups for patent applications.
• Handled patent application filing and served as a liaison with the Intellectual Property Office.
• Acted as a liaison with structural engineers and external consultants for design validation.
• Served as a liaison for third-party accreditations, such as PCAB.
• Tracked and monitored construction tools and equipment usage.
• Contributed as a member of the research and development team.

• Monitored daily site progress to ensure timely completion.
• Tracked and ensured the availability of materials for ongoing and upcoming activities.
• Monitored forecast activities and aligned them with project timelines.
• Resolved all project-related issues efficiently.
• Supervised and pushed subcontractors to complete activities on time while adhering to quality standards and project requirements.
• Monitored subcontractor compliance with ISDP task requirements within the stipulated time frame.
• Assisted subcontractors in resolving site access issues.
• Supervised and inspected subcontractor activities to ensure adherence to approved design drawings and customer requirements.

• Responsible for quantifying and preparing accurate bills of quantities for release to the site.
• Conducts checks on finished bills to ensure accuracy.
• Submits margin reports after completing each bill of quantities.
• Coordinates with Site/Construction Managers regarding materials and labor requirements on-site.
• Addresses site issues related to materials and labor.
• Communicates with suppliers to ensure timely delivery of materials to the site.
• Works with the admin team to secure documents needed for the bill of quantities.
• Ensures adherence to material specifications and provides all materials required as per house contract requests and tenders.
• Verifies the accuracy of job documents provided.
• Prepares job estimates using Databuild and Businesscraft software.

• Our specialization lies in the installation of temperature control barriers and mechanical insulation systems.
• Within this profession, a key facet of my role involves the precise measurement of insulation-required areas, encompassing walls, floors, and ceilings.
• This task is facilitated through the proficient use of software tools such as Planswift, Excel, and ArchiCAD, and extends across both residential and commercial properties.
• Furthermore, the scope of responsibilities in this position encompasses gaining familiarity with various construction sites through the examination of blueprints.
• Effective communication with contractors and clients is essential to ascertain precise pricing for project proposals, and to establish a comprehensive project timeline and materials schedule.
• Accomplishments:
  • Precision in Measurement and Estimation: Achieved a track record of consistently accurate measurements and estimations for insulation requirements across various project sites, ensuring optimal temperature control and mechanical insulation solutions. This precision contributed to the successful execution of projects in both residential and commercial properties.
  • Streamlined Project Communication: Established an effective communication framework with contractors and clients, leading to accurate and competitive pricing for project proposals. This proficiency in communication not only enhanced client satisfaction but also improved the efficiency of project planning and execution.
  • Efficient Project Management: Demonstrated adeptness in project management by creating comprehensive project and materials schedules. This organizational skill played a pivotal role in project completion within stipulated timelines, enhancing overall project efficiency and minimizing delays.

• My role entails the meticulous identification of all project-related expenses within Western and Southwest Australia, collaborating with various housing brands such as BGC Residential and Ventura Homes.
• My typical duties encompass a comprehensive analysis of project plans, bills of quantities, and related documentation to accurately gauge expenditure.
• Furthermore, I am tasked with conducting extensive research, sourcing, and engaging in negotiations to secure the most favorable prices and quotes from both suppliers and subcontractors
• Accomplishments:
  • Comprehensive Cost Analysis: Orchestrated a systematic approach to meticulously identify and account for every cost component associated with projects spanning Western and Southwest Australia. This resulted in enhanced financial transparency and strategic resource allocation.
  • Precise Project Estimations: Demonstrated proficiency in analyzing intricate project plans, bills of quantities, and multifaceted project documentation, leading to precise cost estimations that facilitated effective budgeting and financial planning.
  • Strategic Vendor Engagement: Leveraged a strategic approach in researching, sourcing, and engaging with suppliers and subcontractors, culminating in the procurement of optimal prices and competitive quotes. This contributed to cost savings and improved project profitability.
  • Enhanced Supplier Relationships: Actively engaged in negotiations with suppliers and subcontractors, fostering mutually beneficial partnerships that not only ensured cost efficiency but also promoted reliability and quality in the procurement process.
  • Multi-Brand Expertise: Successfully navigated diverse house brands such as BGC Residential and Ventura Homes, showcasing adaptability and expertise in tailoring cost strategies to meet the unique requirements of each brand within the dynamic construction landscape of Western and Southwest Australia.
  • Over nearly two years of working with Australian Builders, I handled projects for BGC Residential and Ventura Southwest with budgets ranging from $200,000 to $300,000, as well as projects for Simonds Homes with budgets ranging from $200,000 to $700,000. Our responsibilities encompassed a wide range of construction components and services.

• A primary responsibility inherent to the role of an estimator entails collaborating closely with the sales team to formulate compelling proposals.
• This involves a meticulous examination of project costs, a keen comprehension of customer specifications, and ultimately presenting a well-defined budgetary framework for projects spanning across Victoria and Queensland under the banner of Simonds Homes.
• Accomplishments:
  • Contributed to Seamless Proposal Development: Played a pivotal role in supporting the sales team by actively participating in the creation of comprehensive project proposals, ensuring alignment with customer requirements and company objectives.
  • Precise Project Cost Monitoring: Demonstrated proficiency in meticulously tracking project costs throughout various stages, thereby promoting cost-effectiveness and budget adherence for multiple projects across Victoria and Queensland.
  • Client-Centric Specification Understanding: Exhibited a deep commitment to understanding and interpreting intricate customer specifications, facilitating the delivery of tailored solutions that precisely met client expectations.
  • Strategic Budgetary Proposals: Successfully formulated and presented well-defined project budgets, enabling effective project planning and execution within the dynamic construction landscape of Victoria and Queensland under the Simonds Homes brand.

• As a Cost Engineer, I specialized in concrete and masonry works, utilizing Buildxact and Jobtread to ensure accurate project cost estimation and management.
• My role involved comprehensive cost analysis, budget forecasting, and resource allocation to optimize project efficiency and profitability.
• Conducted detailed cost estimation for concrete and masonry projects using Buildxact and Jobtread. Analyzed project specifications, blueprints, and other documentation to prepare accurate cost estimates.
• Collaborated with project managers, architects, and engineers to gather necessary project information.
• Managed project budgets, monitored costs, and ensured projects stayed within financial constraints.
• Developed and maintained cost databases, ensuring up-to-date pricing and cost information.
• Assisted in procurement processes by providing cost estimates and vendor comparisons.
• Prepared and presented cost reports to stakeholders, highlighting key financial metrics and project performance. Identified cost-saving opportunities and implemented strategies to enhance project efficiency.
• Conducted risk assessments and developed contingency plans to mitigate potential financial risks.
• Provided support in project scheduling and resource allocation to ensure timely project completion.
• Accomplishments:
  • Successfully estimated and managed costs for multiple high-value concrete and masonry projects. Implemented cost-saving measures that resulted in a 10% reduction in project expenses.
  • Improved accuracy of cost estimates by 15% through diligent analysis and use of advanced estimation tools.
  • Played a key role in enhancing project management processes by integrating Buildxact and Jobtread systems.

• In my position, I focus on meticulously identifying all project-related expenses in Melbourne, Australia, while working closely with diverse housing brands like Home Buyers Centre, Boutique Home, and KDRB.
• My regular tasks involve conducting comprehensive analyses of project plans, bills of quantities, and related documents to precisely assess expenditure.
• Additionally, I am responsible for coordinating the scheduling of each house, ensuring smooth collaboration among various trades, suppliers, site managers, prestart teams, drafters, interior designers, and approval processes, especially concerning different facade and house models.
• Accomplishments:
  • Comprehensive Cost Analysis: Implemented a systematic approach to meticulously identify and track every cost component associated with projects across Melbourne, Australia, resulting in improved financial transparency and strategic resource allocation.
  • Precise Project Estimations: Exhibited proficiency in analyzing complex project plans, bills of quantities, and detailed project documentation, leading to accurate cost estimations that facilitated effective budgeting and financial planning.
  • Strategic Trades Engagement: Utilized a strategic approach to research, source, and engage with suppliers and subcontractors, resulting in the procurement of optimal prices and competitive quotes. This approach contributed to cost savings and enhanced project profitability.
  • Enhanced Supplier Relationships: Actively participated in negotiations with suppliers and subcontractors, fostering mutually beneficial partnerships that not only ensured cost efficiency but also promoted reliability and quality in the procurement process.
  • Multi-Brand Expertise: Demonstrated adaptability and expertise in navigating diverse house brands such as HBC, Boutique Homes, and KDRB, tailoring cost strategies to meet the unique requirements of each brand within Melbourne's dynamic construction landscape in Victoria.

• Preparation and evaluation of documents, electrical drawings and plans to determine the scope of work. 
• Preparing accurate electrical estimates and pricing for a job, taking into consideration all project requirements while ensuring estimates comply with legislation, standards and safety requirements.
• Estimation of materials, costs, and labor required for electrical installations in residential projects. 
• Identifying cost and time constraints to optimize project progress.
• Maintaining electrical cost database. 
• Timely preparation and submission of correct and technically accurate electrical tenders

• Preparation of cost plans and value engineering to help the design team control the expenditure and to ensure that the project cost is kept within budget which involves liaising with architects, engineers, and subcontractors. 
• Responsible for providing supplier cost input during sales bidding phase and report back on cost performance to project team. 
• Collaborating with other Subcontract Program Managers in managing Subcontract Partner performance. 
• Develop negotiation strategies and lead formal negotiations (Price, Delivery, Terms & Conditions). 
• Preparation of tender documents, tender clarification, and tender report to provide a reliable basis on which to tender for proposal construction works and to create a comprehensive priced document, on time for submission. 
• Measurement and preparation of take-off Quantities which includes BQ measurement, handling of queries in completing the measurement, information dissemination to design consultants and preparation of necessary QA documents pertaining to BQ preparation to provide a strong basis for budgetary control and accurate cost reporting of the contract.
• Preparation and review of needed documents for ongoing variations in project’s progress such as RFAs and RFIs. 
• Monitoring of project progress and valuation of variations in the work during the contract.  Quantity and cost estimation of materials, fixtures, and labor required at site.

• Supervision of construction to ensure that the electrical system is designed, installed, and tested in compliance with safety standards, electrical codes, and project specifications. 
• Preparation and design of detailed electrical drawings such as single line diagrams, power layouts, lighting layouts, and load schedules for electrical equipment. 
• Coordination of project activities including organizing & directing personnel to ensure satisfactory project performance. 
• Supervision of pulling, termination, and installation of Low & Medium Voltage cables. 
• Estimate Quantities and Schedule activities. 
• Forecasted monthly budget, analyze project cost, and apply value engineering to ensure that the project is kept within budget

• Preparation and design of detailed electrical drawings such as single line diagrams, power layouts, lighting layouts, and load schedules for electrical equipment. 
• Estimate Quantities and Schedule activities. 
• Forecasted monthly budget, analyze project cost, and apply value engineering to ensure that the project is kept within budget.

June 2023 - April 2024 ❖ Liaise with Consultants, Pre-site and On-site Coordinators, Drafting, and relevant personnel to ensure consistency in the document ❖ Perform detailed cost estimate and ensure that cost projection will be within the projected margin. ❖ Responsible for margin declaration and locking in of budget once the estimated cost has been approved. ❖ Responsible for releasing of job to site that includes raising of Purchase Orders and approval of necessary expenditures that is outside the projected margin. ❖ Responsible for any estimating issues that will arise after job release, including but not limited to the revision of quantities and cost due to variations, change in suppliers, answers to queries. ❖ Proper coordination with the Sydney office regarding any estimation updates/changes, supplier price increase, site issues, or ambiguities to the job and any related documents thereto.

❖ Liaise with Prestart, Drafting, and relevant personnel to ensure document consistency. ❖ Perform detailed cost estimate and ensure that cost projection will be within the contract budget. ❖ Checking of junior quantity surveyors' takeoff prior sending to Perth. ❖ Responsible for any revision to quantities and cost due to variations, change in suppliers, answers to queries, if will be requested by Perth office. ❖ Proper coordination with the Perth office regarding any hitlist, corrections, clarification or ambiguities to the job and any related documents thereto.

❖ Provide detailed takeoff estimates with visual diagram for wall, floor and ceiling insulation incl building wraps of residential and commercial projects to Australian clients (WA, NSW, Victoria, ACT, QLD) ❖ Analyze drawing, specification, and other requirements in preparation for comprehensive cost estimate ❖ Ensure that estimate comply with the Basix and Nathers ❖ Had been exposed to and trained in the cost estimation of projects from Allcastle Homes - Sydney and BGC Residential - WA.

❖ Conduct inspection on site to ensure all work is complying with the approved drawings and schedule ❖ Coordinate site works and design issues to project manager, and/or project’s consultant s and owner ❖ Evaluate/Reconcile assigned contractor and owner supplied materials (OSM) supplier billing ❖ Estimate materials/equipment for deductive and additive works reconciliation with contractor prior to issuance of change order

• Design mechanical, fire protection system and/or plumbing layouts.
• Prepare and review design calculations based on the requirement of the client.
• Develop specifications to meet project requirements.
• Develop drawings for Cad input.
• Review drawings from CAD provided by the client or from the designer.
• Carry out duties in accordance with quality and environmental management systems, health and safety policies, and procedures.
• Supervise the on-site project installation of the design plans and layouts.
• Delegate tasks and responsibilities to appropriate personnel
• Prepare engineering reports by collecting, analyzing, and summarizing data in the ongoing construction.

• Review design drawings and check all the necessary information needed for creating the bid documents. Create the Mechanical take-off based on the Mechanical Schedule.
• Request for quotation/pricing to all approved Vendors/ Suppliers that are required for the project.
• Estimate accurately each job required for the specific scope of work, including labor cost per each job requirement.
• Ensures Bid Documents and Vendor Quotations/Pricing are prepared based on the schedule given by the Project Manager in accordance GC Bid date.
• Create design mechanical drawing as needed for the preparation of ducting and HVAC piping estimate.
• Draft the Estimate Sheet which includes the selected pricing from approved Vendors/Suppliers to be reviewed by the Project Manager.
• Create the Proposal Sheet which includes all the mechanical requirements for the project and the final bidding price to be approved by the Project Manager.

• Supervise and oversee the execution of the project installation of the design plans and layouts.
• Prepare construction and layout plans.
• Check any deviations in design as implemented in the project and recommend prompt corrective actions.
• Estimates project estimation costs.
• Decide on technical equipment to be used.

•  Develop, implement, improve, and maintain the stability and capability of the process
• Gather and analyze data to recommend corrective actions and improvements.
• Support on Law Yield Analysis related to new material, new design, new methods/processes, new machines, etc.
• Provides technical support for preventive maintenance, repair, and troubleshooting of equipment as well as assisting technicians on their daily activities.
• Improve production efficiency by analyzing and planning workflow, space requirements, and equipment layouts.
• Assure product and process quality by design, testing methods, and establishing standards for the manufacturing process.
• Collaborate with technicians and operators and other personnel to identify.
• Define and develop solutions to production problems as well as in developing and testing product/process improvement and procedures.
• Provide decision-making information by calculating production labor and material cost, reviewing production schedules, and estimating future requirements.
• Prepare engineering reports by collecting, analyzing, and summarizing information and trends.
• Keep equipment operational by conducting maintenance and repair services following manufacturing instructions and established standards.

• In charge in the monitoring of the daily spool erection status.
• Monitoring of the daily delivery of spool and random/straight pipes and preparation of gate pass for workable spools to be delivered to the jobsite.
• Track and update the daily report of hauling, rigging, fit-up and full welding of pipe spools.
• Analyze and interpret piping isometric drawings to be able to determine and locate the field joints and connections in a pipe run i.e. reducer, tee, elbow, flanges and valves.
• Gather daily accomplishment report from the jobsite to be updated on a daily basis.
• Coordinates issues and concerns with other team members and other groups for the overall reporting of piping erection progress in daily, weekly and monthly basis.
• Performs other duties as instructed by the superior. Projects Worked

• Observe and familiarize the workflow for every department under project-based activities.
• Uphold knowledge in reading and analyzing AFC piping isometrics and structural drawings
• Familiarizing in welding processes, structural fabrication and assembly, piping works, painting and quality control. • Familiarize in concepts of Project Controls and Planning.
• Perform and conduct time and motion studies to get actual man-hours and consumables in structural, vessels and piping works based on real time activities.
• Observe and key-in problems encountered in the fabrication that cause delays.  Uphold knowledge in the health and safety policies and procedures.
• Monitors daily progress (Quantity Surveying) of in-house projects in the yard and coordinates necessary concerns to the other departments.
• Performs other duties and responsibilities as instructed by the superior. 

• Preparation and implementation of the HVAC system installation procedures and work instructions
• Resource requirements monitoring (manpower, equipment, consumables and materials) for HVAC installation works.
• Coordinates HVAC issues and concerns to all involved/affected discipline, departments, client and subcontractors.
• Prepares Material Approval Requests and Technical Bid Evaluation reports for HVAC materials and equipment as per approved client IFC drawings and project specifications.
• Liaise with Procurement and material expediting team to carryout necessary follow-ups with vendors / suppliers / sub-contractors for timely execution / delivery of the ordered materials and equipment.
• Attends/presides project coordination meetings to discuss progress and resolve problems.
• Preparation of work plan, daily job cards, progress reports and look-ahead schedules as required by Client.
• Ensure that all HVAC site activities are conducted under controlled conditions as per shop drawings, method statements, specifications and work plan.
• Prepares and submits Site Queries to client for specification review, clarifications, site installation concerns, deviations and modification proposals.
• Daily reporting on resources, materials, consumables, equipment and man-hours used for the execution of site instructions, site query correspondences and modification instructed by the client needed for variation/change orders documentation.
• Conducts site inspections / walk-downs for QA/QC compliance of duct works, refrigerant piping installation, insulation and cladding, and HVAC equipment installation such as AHUs, ACCU, Chemical Filter Units, Electric Duct heaters, Dampers and Exhaust Fans as per approved Inspection and Test Plan and project ITRs (Inspection and Test Record).
• Coordinates with HVAC vendor and sub-contractor on the needed actions to execute on the HVAC system and equipment to close and rectify punch items raised during QC inspections and walk-downs.
• Attends and witness factory acceptance test (abroad) to ensure HVAC equipment and accessories are complying with approved technical data sheets and general arrangement drawings as per approved Inspection and Test Plan.
• Close out of site instructions and site queries through site inspection and documentation.
• Assigned as objective champion in Right First-Time program requirement of the client, review and closeout of lessons learned from client previous projects, presides RFT toolbox talks and conducts site walkthroughs to assess project compliance of each discipline areas.
• Maintain good client relationship at all times.

• Responsible for implementation and monitoring of all mechanical works (MEPFS) based on approved construction plan, specifications, work methodology and safety procedures.
• Interpretation of construction drawings, review contract documents and approved specifications and applicable standards prior to job execution.
• Develops project objectives by reviewing project proposals, specification and plans; conferring with management.
• Determines project responsibilities by identifying project phases and elements; assigning workforce to phases and elements; reviewing bids and quotation from sub-contractors and suppliers.
• Estimate and prepare material take-off and assign resources (manpower, materials, consumables, tools & equipment) required to execute mechanical related works.
• Determines project specifications by studying product design, customer requirements, and performance standards; completing technical studies; preparing cost estimates.
• Conducts toolbox talks to discuss daily activities, quality and safety in every phases of the project.
• Ensures high quality workmanship and operation by designing and conducting tests and inspection as per client or project specification or applicable local regulation and standard.
• Liaise with suppliers, subcontractors and client for any job-related concerns. Manage and provide engineering and technical support to mechanical groups on site.
• Determines project schedule by studying project plan and specifications; calculating time requirements; sequencing project elements.
• Support field in expediting schedule, completion of field paperwork, expediting materials and equipment delivery.
• Maintains project schedule by monitoring project progress; coordinating activities; resolving problems.
• Controls project plan by reviewing design, specifications, and plan and schedule changes; recommending actions.
• Prepares work method statement and procedure for organized and safe execution of work. Projects Accomplished

• Responsible for the design and preparation of all mechanical, ventilation, air-conditioning and fire protection drawings using CAD software and verification of submitted construction plans by vendor/contractor for site implementation. 
• erforms HVAC design calculations (heat load calculation, ductwork and equipment sizing) using manual and software-aided approach (Carrier HAP, E20) following international standards (ASHRAE, SMACNA, etc.) to provide complete mechanical design.
• Review of project specifications, standards and local building design guidelines and regulations prior to mechanical and fire protection design execution.  Conduct project surveys on site by collecting necessary information and site condition assessment needed for design.
• Prepare estimates and material take-off needed for quotations and bidding process.
• Oversee all onsite and offsite constructions to monitor compliance with building and safety regulations.
• Oversee and manage mechanical aspects of the projects from design, construction, completion and hand-over.
• Oversee the installation of Samsung Experience Store/Customer Service Mechanical Systems
• Liaises with Account Managers, clients, architectural designers, contractors and building admin to ensure projects are within timelines, guidelines, quality standards and budget.
• Review quotations and costings submitted by vendors/contractors based on submitted mechanical plans.
• Maintenance check-ups for Samsung Experience Store/Customer Service. Conducts constant site inspections before and after construction while facilitating the tests conducted by building admin for acceptance with building admin and summarizes punch lists and resolutions report.
• Prepare site inspection and completion reports and organize paper works for proper project documentation.
• Submit status update on all projects handled on a weekly basis. 

Designation: ENGINEER Duties & Responsibilities • Observe and familiarize the workflow for every department under project-based activities. • Uphold knowledge in reading and analyzing AFC piping isometrics and structural drawings • Familiarizing in welding processes, structural fabrication and assembly, piping works, painting and quality control. • Familiarize in concepts of Project Controls and Planning. • Perform and conduct time and motion studies to get actual man-hours and consumables in structural, vessels and piping works based on real time activities. • Observe and key-in problems encountered in the fabrication that cause delays. • Uphold knowledge in the health and safety policies and procedures. • Monitors daily progress (Quantity Surveying) of in-house projects in the yard and coordinates necessary concerns to the other departments. • Performs other duties and responsibilities as instructed by the superior. 5 Address: No. 146, San Pedro, Bauan, 4201 Batangas, Philippines, • Mobile: +63 9177227308 • Email: hayner.deguzman@gmail.com CV -Mechanical/HVAC Engineer

Philippines Scope: Installation of HVAC System for Local Electrical and Local Instrument Rooms / Modules Client: JGC, Chiyoda, KBR (JKC) Joint Venture, INPEX (Owner)

OF MANILA- Company: BATANGAS, PHILIPPINES Designation: HVAC ENGINEER Duties & Responsibilities • Preparation and implementation of the HVAC system installation procedures and work instructions • Resource requirements monitoring (manpower, equipment, consumables and materials) for HVAC installation works. • Coordinates HVAC issues and concerns to all involved/affected discipline, departments, client and subcontractors. • Prepares Material Approval Requests and Technical Bid Evaluation reports for HVAC materials and equipment as per approved client IFC drawings and project specifications. • Liaise with Procurement and material expediting team to carryout necessary follow-ups with vendors / suppliers / sub-contractors for timely execution / delivery of the ordered materials and equipment. • Attends/presides project coordination meetings to discuss progress and resolve problems. • Preparation of work plan, daily job cards, progress reports and look-ahead schedules as required by Client. • Ensure that all HVAC site activities are conducted under controlled conditions as per shop drawings, method statements, specifications and work plan. • Prepares and submits Site Queries to client for specification review, clarifications, site installation concerns, deviations and modification proposals. • Daily reporting on resources, materials, consumables, equipment and man-hours used for the execution of site instructions, site query correspondences and modification instructed by the client needed for variation/change orders documentation. • Conducts site inspections / walk-downs for QA/QC compliance of duct works, refrigerant piping installation, insulation and cladding, and HVAC equipment installation such as AHUs, ACCU, Chemical Filter Units, Electric Duct heaters, Dampers and Exhaust Fans as per approved Inspection and Test Plan and project ITRs (Inspection and Test Record). • Coordinates with HVAC vendor and sub-contractor on the needed actions to execute on the HVAC system and equipment to close and rectify punch items raised during QC inspections and walk-downs. 4 Address: No. 146, San Pedro, Bauan, 4201 Batangas, Philippines, • Mobile: +63 9177227308 • Email: hayner.deguzman@gmail.com CV -Mechanical/HVAC Engineer • Attends and witness factory acceptance test (abroad) to ensure HVAC equipment and accessories are complying with approved technical data sheets and general arrangement drawings as per approved Inspection and Test Plan. • Close out of site instructions and site queries through site inspection and documentation. • Assigned as objective champion in Right First-Time program requirement of the client, review and closeout of lessons learned from client previous projects, presides RFT toolbox talks and conducts site walkthroughs to assess project compliance of each discipline areas. • Maintain good client relationship at all times. Projects Accomplished

Project: MOL-Magsaysay Maritime Academy (Ship-In Campus Building), Cavite, Philippines Scope: Building Construction (Ventilation, HVAC, Fire Protection, Plumbing works) Client: SMCC Philippines (Gen. Contractor)

Period: April 2018 - October 4, 2019 Designation: Project Engineer (Mechanical) Projects: EFC Phase 2 and Phase 3 Renewal, TRCF Phase 2 Expansion Scope: HVAC, Plumbing, Fire Protection, Utilities and Process piping installation Client: JX Nippon Mining and Metals Philippines 3 Address: No. 146, San Pedro, Bauan, 4201 Batangas, Philippines, • Mobile: +63 9177227308 • Email: hayner.deguzman@gmail.com CV -Mechanical/HVAC Engineer

(MECHANICAL) Duties & Responsibilities • Responsible for implementation and monitoring of all mechanical works (MEPFS) based on approved construction plan, specifications, work methodology and safety procedures. • Interpretation of construction drawings, review contract documents and approved specifications and applicable standards prior to job execution. • Develops project objectives by reviewing project proposals, specification and plans; conferring with management. • Determines project responsibilities by identifying project phases and elements; assigning workforce to phases and elements; reviewing bids and quotation from sub-contractors and suppliers. • Estimate and prepare material take-off and assign resources (manpower, materials, consumables, tools & equipment) required to execute mechanical related works. • Determines project specifications by studying product design, customer requirements, and performance standards; completing technical studies; preparing cost estimates. • Conducts toolbox talks to discuss daily activities, quality and safety in every phases of the project. • Ensures high quality workmanship and operation by designing and conducting tests and inspection as per client or project specification or applicable local regulation and standard. • Liaise with suppliers, subcontractors and client for any job-related concerns. • Manage and provide engineering and technical support to mechanical groups on site. • Determines project schedule by studying project plan and specifications; calculating time requirements; sequencing project elements. • Support field in expediting schedule, completion of field paperwork, expediting materials and equipment delivery. • Maintains project schedule by monitoring project progress; coordinating activities; resolving problems. • Controls project plan by reviewing design, specifications, and plan and schedule changes; recommending actions. • Prepares work method statement and procedure for organized and safe execution of work. Projects Accomplished

Projects: Samsung Experience stores (Concept stores Nationwide) Scope: HVAC and Fire Protection Design and Installation Client: Samsung Electronics Philippines Corporation 2 Address: No. 146, San Pedro, Bauan, 4201 Batangas, Philippines, • Mobile: +63 9177227308 • Email: hayner.deguzman@gmail.com CV -Mechanical/HVAC Engineer

PHILIPPINES Designation: MECHANICAL ENGINEER Duties & Responsibilities • Responsible for the design and preparation of all mechanical, ventilation, air-conditioning and fire protection drawings using CAD software and verification of submitted construction plans by vendor/contractor for site implementation. • Performs HVAC design calculations (heat load calculation, ductwork and equipment sizing) using manual and software-aided approach (Carrier HAP, E20) following international standards (ASHRAE, SMACNA, etc.) to provide complete mechanical design. • Review of project specifications, standards and local building design guidelines and regulations prior to mechanical and fire protection sprinkler design execution. • Conduct project surveys on site by collecting necessary information and site condition assessment needed for design. • Prepare estimates and material take-off needed for quotations and bidding process. • Oversee all onsite and offsite constructions to monitor compliance with engineering plans, local government & safety regulations. • Oversee and manage mechanical aspects of the projects from design, construction, completion and hand-over. • Oversee the installation of Samsung Experience Store/Customer Service Mechanical Systems • Liaises with Account Managers, clients, architectural designers, contractors and building admin to ensure projects are within timelines, guidelines, quality standards and budget. • Review quotations and costings submitted by vendors/contractors based on submitted mechanical plans. • Maintenance check-ups for Samsung Experience Store/Customer Service. • Conducts constant site inspections before and after construction while facilitating the tests conducted by building admin for acceptance with building admin and summarizes punch lists and resolutions report. • Prepare site inspection and completion reports and organize paper works for proper project documentation. • Submit status update on all projects handled on a weekly basis. Projects Accomplished

• Reviewed all electrical submittals, providing detailed comments and guidance to ensure the successful execution of detailed engineering. Evaluations were conducted in strict accordance with local regulations, standards, and applicable international standards.

• Attended weekly coordination meetings with the EPC contractor and equipment vendors, ensuring alignment on project goals and addressing any emerging issues.

• Conducted site surveys at oil fields to gather critical information necessary for the accurate planning and execution of electrical projects.

• Actively participated in internal and external project meetings, including reviews of 3D drawings and HAZOP assessments, contributing to the overall safety and effectiveness of the projects.

• Contributed to the documentation and application of lessons learned from previous projects to improve future project execution.

Projects Handled/Involved:

• Upgrade of Electrical Substations in Beda Oil Field in Benghazi, Libya (Client: AGOCO - Arabian Gulf Oil Co. Libya).
• Detailed Engineering Phase for New Fiscal Metering System at Amal Field in Amal Oil Field, Libya (Client: Harouge Oil Operations).

• Managed a team of Electrical Engineers and Designers, ensuring effective collaboration and timely delivery of project milestones.

• Ensured that all design drawings produced by the team were fully compliant with client specifications, local authority requirements, industry codes, and standards before submission for client review and approval.

• Conducted site surveys and provided comprehensive reports to support accurate and efficient project execution.

• Performed system studies, including Short Circuit, Load Flow, Motor Starting Analysis, Arc Flash, and Protection Coordination using ETAP software to ensure the reliability and safety of electrical systems.

• Prepared illumination calculations using COOPER lighting software, ensuring proper lighting design that meets project requirements.

• Actively participated in both internal and external project coordination meetings, ensuring alignment across all stakeholders.

• Assisted the project team during the proposal stage by providing material take-offs (MTO), bills of quantities (BOQ), work volume assessments, engineering deliverables, man-hour estimates, and defining the electrical scope of work and demarcation. Participated in internal and external project Kick-Off meetings.

• Prepared material requisitions for long-lead electrical items and bulk materials, ensuring timely procurement to meet project deadlines.

• Developed individual design plans, material requisitions, and technical bid evaluations (TBE), and contributed to the Design Basis Memorandum.

• Coordinated with other disciplines, including Piping, Instrumentation, Civil, and Mechanical, to resolve technical issues related to P&ID, control philosophy, foundation details, and rotating equipment.

• Reviewed and evaluated electrical Vendor Print (VP) documents to ensure they met project specifications.

• Provided technical assistance to QA/QC teams by reviewing Inspection Test Plans (ITP) and method statements, ensuring adherence to quality standards.

• Demonstrated a strong commitment to health, safety, and environmental responsibility throughout all project phases.

• Participated in HAZOP meetings when required, contributing to safety and risk management processes.

• Participated in internal QA audits to ensure compliance with quality management systems.

• Participated in Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT) to verify full compliance with contract requirements and ensure system readiness for operation and on-time project delivery.

• Provided technical support to the construction team by responding to technical queries and clarifications, facilitating smooth project execution.

Projects Handled/Involved:

• Engineering, Procurement, Construction, and Management (EPCM) for Sebarok Offshore Expansion Project in Sebarok Offshore (Client: VOPAK).
• EPCM for Bulk Storage Tanks in Pengarang, Malaysia (Client: RAPID).
• Design and Construction of a 3.6 Megawatt Off-Grid Solar Photovoltaic System for SATS Airfreight Terminals 5 and 6, Changi Airport, Singapore (Client: Sembcorp Industries).

• Assisted the Lead Engineer in managing the electrical team, ensuring effective collaboration and task completion.

• Studied client documents, including project proposals and specifications, and raised necessary clarifications to ensure a thorough understanding of project requirements.

• Took responsibility for all electrical scope requirements related to various mechanical packages, ensuring alignment with project objectives.

• Ensured that all design drawings produced by the team were in compliance with client specifications, local authority standards, and industry codes before submission for client review and approval.

• Attended internal and external project coordination meetings with Mechanical Package Equipment Vendors and Client Representatives to facilitate smooth communication and address any project-related issues.

• Acted as the company’s focal point for electrical engineering matters, liaising with engineering services sub-contractors and vendors to ensure alignment with project goals.

• Prepared detailed Electrical Package Equipment Specifications and Datasheets for Gas Turbines, Diesel and Black Start Generators, MV Motors, VSDS, Switchgears, UPS, and other critical components.

• Prepared material requisitions for long-lead electrical items and bulk materials, ensuring timely procurement to meet project timelines.

• Prepared individual design plans, material requisitions, and technical bid tabulations (TBT), and contributed to the Design Basis Memorandum.

• Developed the Power Distribution System philosophy to guide the design and implementation of electrical systems.

• Provided technical clarifications for electrical components of various mechanical package equipment, ensuring accurate and efficient communication with all stakeholders.

• Attended Bid Clarification Meetings with bidders, clients, and other disciplines to resolve any uncertainties and ensure a clear understanding of project requirements.

• Coordinated with other disciplines, including Piping, Instrumentation, Civil, and Mechanical, to resolve technical issues related to P&ID, control philosophy, foundation details, and rotating equipment.

• Reviewed and evaluated electrical Vendor Print (VP) documents to ensure compliance with project specifications.

• Responded to client comments on submitted engineering deliverables, incorporating feedback to meet client expectations.

• Participated in HAZOP coordination meetings and internal QA audits to ensure safety and quality compliance.

• Conducted system studies, including Short Circuit, Load Flow, Motor Starting Analysis, Arc Flash, and Protection Coordination, using ETAP software.

• Performed illumination calculations using DIALUX software to ensure proper lighting design.

Projects Handled/Involved:

• Conceptual & FEED for North Malay Basin Offshore Platform – Greenfield Project in Malaysia (Client: HESS Exploration).
• EPCM for Malikai TLP (Tension Leg Platform) Project – HULL and Topsides, Greenfield Project in Sabah, Malaysia (Client: Sabah Shell Exploration and Production).

• Reported directly to the Senior Electrical Design Engineer, ensuring alignment with project goals and technical requirements.

• Clearly defined the technical scope of each project by making customer requirements and specifications explicit, ensuring precise execution.

• Prepared and managed detailed engineering and design schedules for assigned work, maintaining project timelines and milestones.

• Executed basic electrical engineering tasks in strict accordance with client requirements, ensuring high-quality deliverables.

• Provided early assessments of the company’s technical capabilities relative to customer expectations. Developed tailored solutions that closely matched client needs while optimizing the company’s existing standard offerings.

• Addressed technical inquiries from customers, Project Office Managers (POM), production teams, and draftsmen by delivering well-reasoned and expert advice.

• Formalized technical data for each job using Computer-Aided Design and Drafting (AutoCAD) software, ensuring accurate and precise designs.

• Reviewed and assessed suppliers’ abilities to comply with project specifications, coordinating closely with the materials section. Ensured thorough compliance by verifying supplier acknowledgments of EPS orders and actively participating in necessary meetings, including those with customers when the Senior Electrical Engineer was unavailable.

• Worked in close collaboration with the mechanical section to ensure cohesive project execution.

• Effectively utilized new tools such as ELECDES, AutoCAD 2000, MM3000 system, ELONET, and ECODIAL design software to enhance design accuracy and efficiency.

• Ensured all electrical design drawings adhered to project specifications, relevant codes, and industry standards.

Projects Handled/Involved:

• Design and Supply of 33kV & 13.8kV MC Set Switchgears for six different SEC-CRB Substations in Riyadh (S/S # 7115, 7113, 7782, 8077, 7845 & 7089) as per SEC-CRB Specifications. (Client: HADANIA CORPORATION / Saudi Electricity Company)

• Design and Supervision of 2000KVA Package Substation (Outdoor Kiosk), 33KV/380VAC, 3Ph., 4W, 60Hz, IEC Standard in Tabuk Garden Village-2B, Phase 1, Tabuk, KSA. (Client: Saudi Electricity Company)

• Construction and Monitoring of Two 132KV Substations (S/S No. 8055 & 8056), and Extension of Substation 8020; Design and Monitoring of AC Distribution Board 220/127VAC, 1000A, 3Ph., 4W, 60Hz, 25KA/1sec., IEC Standard. (Client: Daewoo Arabia Limited / Central Region Branch, KSA)

• Design and Monitoring of ATS (Automatic Transfer Switch), 220VAC, 1200A, 25KA/1sec., 60Hz, NEMA Standard for King Fahad International Airport, Riyadh, Saudi Arabia. (Client: Saudi Aramco)

• Taught core engineering subjects such as:
  • Electrical and electronic circuits
  • Energy conversion
  • Engineering materials
  • Mathematics
  • Physics
• Instructed on professional engineering topics, including electrical system design for buildings.

• Prepared comprehensive electrical design packages, including scope of work, electrical specifications, material take-offs, design calculations, construction drawings, material requisitions, and other necessary deliverables.

• Provided clear instructions to electrical designers and CAD operators, overseeing all related engineering design activities to ensure accuracy and efficiency.

• Prepared detailed material take-off (MTO) lists using Excel, ensuring accurate documentation of materials required for projects.

• Assisted senior engineers in evaluating technical bid documents, contributing to informed decision-making during the procurement process.

• Conducted regular site visits to monitor work progress, ensuring that it aligns with applicable codes, standards, specifications, and the overall design intent of the project.

• Interpreted and reviewed vendor drawings to ensure they meet project requirements and specifications.

• Enhanced expertise by studying industry practices and accumulating knowledge from more experienced colleagues.

• Applied Shell DEP standards and other international standards to all projects, ensuring consistency and compliance.

• Maintained positive relationships with consultants, vendors, and contractors, fostering collaboration and smooth project execution.

• Prepared power distribution system design calculations using Excel, ensuring precise and reliable designs.

• Utilized Philips lighting software to perform accurate lighting design calculations for various projects.

Projects Handled/Involved:

• EPC for Caustic Injection Pump (100HP, 480VAC, 3Ph, 60Hz) at Pandacan Oil Depot, Metro Manila, Philippines. (Client: Pilipinas Shell Petroleum Corporation)

• EPC for Retail Stations Upgrade at various retail stations in the National Capital Region, Philippines. (Client: Pilipinas Shell Petroleum Corporation)

• EPC for Substation No. 21A Upgrade (13.8kV, 4000A, 3Ph, 50kA, 60Hz) at Pandacan Oil Depot, Metro Manila, Philippines. (Client: Pilipinas Shell Petroleum Corporation)

• Collaborated with various disciplines including projects, procurement, main contractors, vendors, and other involved groups to ensure seamless project execution.

• Participated in the review of all electrical engineering deliverables submitted by contractors and consultants, ensuring compliance with project specifications and standards.

• Engaged in weekly coordination meetings with contractors, vendors, and third parties to discuss and clarify interfaces, requests, decisions, approvals, project status, and responses.

•  Provided contractors with essential conceptual documents, including specifications, datasheets, and single-line diagrams during the tender stage.

• Responded to contractors' technical queries, ensuring clear and accurate communication of project requirements.

• Conducted regular site visits to assess work progress, providing comments and oversight to ensure compliance with applicable codes, standards, specifications, and the project’s design intent.

•  Offered electrical support to construction contractors by clarifying technical issues during the construction phase.

• Participated in FAT and SAT to verify full compliance with contract requirements, ensuring system availability to support operations and on-time project delivery.

Projects Handled/Involved:

• Design and Construction of GIS 110 kV Substation for Madina Industrial City, Kingdom of Saudi Arabia (Client: SCECO).
• Design and Construction of GIS 132 kV Substation from Riyadh to Qaseem, Kingdom of Saudi Arabia (Client: SCECO).
• Design and Construction of 15MW Wind Power Plant in Taif, Western Province, Kingdom of Saudi Arabia (Client: SCECO).

• Performed engineering duties with a primary focus on power distribution design, including the preparation of essential electrical deliverables such as calculations and drawings.

• Participated in meetings with the Lead Engineer, clients, and third parties to discuss and clarify project interfaces, requests, decisions, approvals, status updates, and responses.

• Regularly reviewed the scope of work to identify any variations, whether initiated by the client or internally within the team. Secured approval from the Lead or Senior Engineer for any changes affecting the project budget or milestones before implementation.

•  Reviewed technical bid submissions for electrical equipment provided by qualified vendors, ensuring compliance with project requirements.

• Incorporated client-approved resolutions of all comments into the drawings and documents produced, under the guidance of the Senior Electrical Engineer or Lead Engineer.

• Applied the latest international and national standards, codes of practice, and good engineering practices to all work performed, ensuring high-quality and compliant outcomes.

• Conducted regular site visits to monitor work progress, providing feedback to ensure adherence to applicable codes, standards, specifications, and the project’s design intent.

• Conducted system studies, including Short Circuit, Load Flow, Motor Starting Analysis, Arc Flash, and Protection Coordination, using ETAP software to ensure safe and efficient electrical system design.

• Prepared power distribution system design calculations using SIMARIS (Siemens software) and lighting calculations using DIALUX software, ensuring accurate and reliable designs.

Projects Handled/Involved:

• Formula-1 Racetrack Project: EPC of Electrical Substations and External Lighting on Yas Island, Abu Dhabi, UAE (Client: Aldar Real Estate Properties).

• EPC of Power Supply Skid for Artificial Lift Well Project: Managed the power supply for five artificial lift wells in Asab and Shah, Abu Dhabi, UAE (Client: Abu Dhabi Company for Onshore Oil Operations - ADCO).

• Lighting and Power Supply Distribution System Design: Designed the lighting and power distribution system for the Baggage Handling System at Dubai International Airport Terminal 3, Dubai, UAE (Client: Dubai Municipality).

• Lead and manage a team of Electrical Engineers, Electrical Design Engineers, and Electrical Designers to ensure timely and efficient project delivery.
• Facilitate effective communication and collaboration within the team and with other engineering disciplines.Provide technical guidance and mentorship to junior engineers and designers, fostering a culture of continuous improvement.
• Oversee the electrical engineering aspects of multiple projects, ensuring compliance with project specifications, industry standards, and client requirements.
• Develop and manage project schedules, ensuring that all deliverables are completed on time and within budget
• Coordinate with project managers and other discipline leads to align project goals and resources.
• Review and approve electrical design documentation, including single-line diagrams, schematics, and layout drawings.
• Ensure all designs meet safety, reliability, and sustainability standards while optimizing cost and performance.
• Perform technical assessments and provide solutions to complex engineering challenges.
• Implement and enforce quality control procedures for all electrical engineering deliverables.
• Ensure adherence to relevant codes, standards, and regulations (e.g., IEC, NEC).
• Conduct design reviews and audits to ensure the integrity and accuracy of all engineering outputs.
• Interface with clients and stakeholders to understand project requirements and address concerns or changes in scope.
• Prepare and deliver technical presentations and reports to clients, providing clear and concise updates on project status and challenges.
• Allocate resources effectively within the team to meet project demands and optimize productivity.
• Monitor project budgets related to electrical engineering tasks and implement cost-saving strategies where applicable.
• Promote the adoption of new technologies and methodologies in electrical engineering design and execution.
• Lead initiatives to improve the efficiency, quality, and sustainability of electrical engineering practices within the team.
• Ensure that all electrical engineering activities comply with HSE policies and procedures.
• Identify and mitigate potential HSE risks in electrical designs and installatio

• Led the electrical engineering efforts for RFS-080 & RFS-084 projects for the RASGAS client, ensuring successful project execution and delivery.

• Assisted the team leader in managing the daily activities of the electrical engineering group, providing regular progress reports on deliverables, and overseeing a team of Electrical Engineers and Designers.

•  Reviewed client documents, including project proposals and specifications, and raised necessary clarifications to ensure alignment with project requirements.

• Ensured that all design drawings produced by the team were in compliance with client specifications, local authority standards, and industry codes before submission for client review and approval.

• Conducted site surveys and prepared detailed site survey reports to support project planning and execution.

• Performed system studies such as Short Circuit, Load Flow, Motor Starting Analysis, Arc Flash, and Protection Coordination using ETAP software. Prepared illumination calculations using COOPER lighting software.

• Actively participated in both internal and external project coordination meetings, including project Kick-Off meetings, to ensure clear communication and alignment across all stakeholders.

• Assisted the project team during the proposal stage by providing material take-offs (MTO), bills of quantities (BOQ), engineering deliverables, man-hour estimates, electrical scope of work, and demarcation.

• Prepared material requisitions for long-lead electrical items and bulk materials, ensuring timely procurement to meet project schedules.

• Prepared individual design plans, material requisitions, technical bid evaluations (TBE), and contributed to the Design Basis Memorandum. Reviewed and evaluated electrical Vendor Print (VP) documents.

• Coordinated with other disciplines, including Piping, Instrumentation, Civil, and Mechanical, to resolve technical issues related to P&ID, control philosophy, foundation details, and rotating equipment.

• Responded to client comments on submitted engineering deliverables and provided technical assistance to QA/QC by reviewing Inspection Test Plans (ITP) and method statements.

• Demonstrated a strong commitment to health, safety, and environmental responsibility throughout all project phases.

• Participated in HAZOP coordination meetings and internal QA audits to ensure compliance with safety and quality standards.

• Participated in FAT (Factory Acceptance Test) and SAT (Site Acceptance Test) to verify full compliance with contract requirements and ensure system readiness for operation and timely project delivery.

• Provided technical support to the construction team by addressing related queries and clarifications.

• Implemented, monitored, and controlled ISMS (Information Security Management System) as per KENTZ Information Security Manual, reporting any violations to the electrical Group Leader.

Projects Handled/Involved:

• RFS-080: FEED and Detail Engineering for AKG-454, Additional Feeder to DP-LCS058 Gas Metering Facilities, LNG Train 2, Ras Laffan (Client: RASGAS).
• RFS-084: Continuous Enhancement Monitoring System for various stacks located in Train-1, 2, 3, 4, 5, 6, AKG-1 & Utilities, RASGAS Refinery (Client: RASGAS).
• Sidra Medical and Research Center Project: Doha, Qatar (Client: Qatar Petroleum).

• Oversaw, monitored, and reviewed contractor transmittals related to the electrical engineering discipline, including electrical layouts, single-line diagrams, load schedules, system studies, specifications, material requisitions, electrical calculations, and other relevant deliverables. Ensured that all systems were safe to operate, maintainable, and compliant with international codes, standards, and project specifications.

• Assisted contractors in resolving technical issues and problems, providing guidance and expertise to ensure successful project outcomes.

• Evaluated, managed, and reported on electrical issues, including design reviews, risk assessments, and coordination with other departments to address and close out any concerns.

• Coordinated, monitored, and reviewed Technical Bid Evaluations for electrical equipment, ensuring that all proposals met the required codes, standards, and project specifications.

• Acted as an interface between the company’s project team and the Lead Contractor, ensuring effective communication and coordination on detailed engineering design matters.

• Actively participated in internal and external project meetings, including reviews of 3D drawings and HAZOP assessments, contributing expertise to ensure project success.

• Served as the company’s primary point of contact for electrical engineering issues, liaising with the Lead Contractor to address any concerns or challenges.

• Contributed to the documentation of lessons learned and applied relevant insights from previous Aramco projects to improve current and future project outcomes.

Projects Handled/Involved:

• Detailed Engineering of New Jazan Refinery in Jizan Province, Saudi Arabia (Client: Saudi Aramco).

• Lead the design of electrical systems for various projects, ensuring they meet all required standards.
• Create and review electrical diagrams and drawings.
• Choose the right electrical components for projects.
• Oversee the electrical engineering part of multiple projects, ensuring they stay on schedule and within budget.
• Work closely with other engineering teams to ensure smooth integration of electrical systems.
• Communicate with clients, contractors, and suppliers to keep projects on track.
• Guide and support junior engineers and designers.
• Review and ensure the quality of electrical designs.
• Solve technical issues that come up during projects.
• Understand client needs and offer technical solutions.
• Prepare and present reports and project updates to clients.
• Make design adjustments based on client feedback.
• Make sure all designs follow local and international standards.
• Keep up-to-date with changes in industry regulations.
• Assess and manage risks related to electrical safety.
• Introduce new technologies and methods to improve efficiency.
• Stay informed about industry trends and recommend useful new practices.
• Encourage continuous learning and improvement within the team.
• Effectively allocate team resources to maximize productivity.
• Monitor budgets and find ways to save costs without sacrificing quality.
• Ensure all work follows health, safety, and environmental guidelines.
• Identify and address potential safety risks in electrical systems.
• Promote a safety-focused culture in the team.

Oversee electrical work for refinery and petrochemical projects, keeping them on schedule and within goals.
Coordinate with other engineering teams to ensure smooth integration of electrical systems.
Communicate with contractors and vendors to meet project needs.
Review and approve electrical designs, ensuring they meet standards and regulations.
Provide technical guidance to ensure safe and accurate design and installation.
Conduct audits and inspections to maintain safety and quality.
Act as the main contact for electrical engineering issues, updating clients and stakeholders regularly.
Prepare and present reports and technical documents to management and partners.
Resolve any electrical issues raised by stakeholders.
Ensure all electrical work follows local regulations, international standards, and safety protocols.
Conduct risk assessments and implement safety measures to prevent electrical hazards.
Promote safety through regular briefings and training sessions.
Allocate resources effectively to ensure efficient use of manpower and materials.
Monitor budgets and find ways to save costs in electrical tasks.
Implement quality control procedures to ensure high standards in all electrical work.
Visit sites to check that installations match approved designs.
Address any defects or non-conformities in electrical systems.
Promote the use of new technologies and practices to improve project efficiency.
Lead efforts to improve the reliability and performance of electrical systems.
Provide leadership and mentorship to junior engineers and support staff.
Encourage collaboration and continuous improvement within the team.

Develop contract proposals to support organizational goal And Quantity Surveyor • Review contract estimates, including proposed materials, production costs, - Civil Engineer etc and determine whether they seem reasonable and accurate • Ensure that all records are accurate and up to date +63 961 841 1850 • Write contract letters and other communications and notice • Negotiate and approve contract terms while ensuring that projects remain rominareyes1993@gmail.com within the established budget Local Address: 61 St. Blk 87 Lot 07, MRC, Sapang Biabas • Attend meetings to assess progress on projects which are in motion, and take Mabalacat City, Pampanga, detailed notes to share with stakeholders Philippines • Create regular status reports regarding progress on projects

October 4, 2021 to Present Under: Woodworx Joinery Pty Ltd

Cloudstaff Modern Workforce, Inc. L2, New Street Building, McArthur Highway, Balibago, Angeles City 2009

October 4, 2021 to Present Under: Woodworx Joinery Pty Ltd

Cloudstaff Modern Workforce, Inc. L2, New Street Building, McArthur Highway, Balibago, Angeles City 2009

• Assist in detailing and modeling of structural steel, cast in place and precast concrete, structures this includes plans, sections, elevations, and details cut automatically in 3D model for medium and large scale projects.
• Application of components necessary to complete the joint connections based on design and engineering calculations; create erection plans, shop drawings, single part drawings and gather sheets

• Read blue print and technical documents in order to prepare estimates
• Use computer softwares to calculate estimates
• Collaborate with Engineers, Clients, Architects, and Contractors on estimates

• Performs the review of Plans and Specifications of Architectural, Interior Design, Structural and other trades such as Mechanical, Electrical, Plumbing / Sanitary, Fire Protection, Site Development and Landscaping as to its completeness and constructability to minimize change orders / variation orders & claims from Contractors
• Monitors the contractor (s) interfacing and coordination as necessary for all aspects of the project.
• Monitors the construction works in progress for compliance with drawings, specifications, and contract documents.
• Clarifies technical problems, coordination their resolution with the Architect / Engineer Consultants and Owner as required.
• Monitors contractor (s) maintenance of as-built drawings and accepting possession upon contract completion.
• Review together with the QS, Contractors (s) change order request for variations in time and cost and making recommendations for settlement.
• Conducts acceptance inspection for the inspection for the Owner and preparing completion of known defects (punch list) and following up on remedial works.
• Provides procurement, expediting and warehousing management services for owner furnished items as required.
• Executes contract close-out with contractor (s) upon completion of work/project. • Clarifies / discusses procedures for processing of shop drawings, sample of materials and catalogs of equipment (All sample materials and brochures shall become the property of the Owner); procedures to monitor preparatory works for attainment of the scheduled progress of works.
• Reviews, evaluates, processes all application of progress billings or payments of the contractors and vendors per approves procedures of the Owner.
• Verifies, evaluates and recommends for approval by the Owner field revisions, change orders and substitutes due to the existing conditions or changes in designs and specification authorized by the Owner before implementation.
• Monitors on-site security, first aid, fire protection and safety programs approves by the Owner, including the protection of Owner, including protection of Owner furnished materials and equipment.
• Monitors closely the effectivity of all Bonds and Insurances and advise the contractor at least 3 months prior to expiration.
• Discusses and implement the necessary Quality Assurance / Quality Control Programs to ensure compliance by all Contractors and Vendors with drawings, specifications and contract documents.
• Checks the materials and workmanship for compliance with plans, specification and contract documents.
• Inspects and audit the contractors work at the project site. Report to the RCM any deviation from the contract documents, drawings and specifications or against accepted construction and / or engineering standards and practices with prior approval from the Owner.
• Supervises and arrange the inspection, testing and acceptance of all materials (including Owner furnished) before the materials are utilized in the Project. Evaluation reports and recommendations, of the test results shall be submitted to the RCM for review.
• Requires the contractors after the award of works to submit the Technical Submittal Schedule and see to it that those submittals are submitted on time for review and approval by the Design Consultants concerned. Review and comment first on all Technical Submittals prior to submission to Design Consultant.
• Full time site inspection of works to ensure conformity with plans and specifications and related documents. Report non-conformance and resolve the design immediately
• Together with the QS will advise and assist the RCM in maintaining control of the cost from the start of the project up to its completion and close-out stage.
• Periodically reviews, prepares estimates with QS, for approved changes by the Owner, and revise the project cost construction progresses. Approved cost changes shall be incorporated as they are approved. Monitor estimates changes to be sure that neither the Master Project Time Schedule / CPM for the contract (s) price is in danger or being exceeded.
• Review and process together with the QS applications for progress payments. Advise the owner regarding the items which have to be completed or completed with prior to the approval of the progress payment.
• Review and determine the validity of Contractors claims and provide recommendation. Quantity Surveyor shall do the evaluation of claims if such has merit.
• See to it that all the labor, materials, and equipment of the contractor are adequate and available beforehand for the scheduled work to prevent delays.
• Coordinates with the design consultant and contractors regarding clarifications on plans and specifications and other design issues to ensure expeditious executions and completion of works thus avoid project schedule slippage. Attend to all problems for immediate resolution and anticipate potential problems to prevent them from occurring.
• See to it that all labor, materials, and equipment of the contractors are adequate. Update and keep the current Master Project Schedule vis-à-vis the detailed work schedule / program of the contractors. A “catch-up schedule” will be required from the contractor to prevent further slippage on their schedule. Monitor the “look ahead” schedules.
• To ensure those OSM are delivered on time constraint monitoring and follow-up are needed. Thus, will not cause delays on the works of the contractor.
• Ensure that the contractors maintain a current set of records, construction drawings and specifications and any other required Project documents, at the Project Site.
• Prepares and keep accurate daily progress reports during all the stages of construction.
• Ensure the preparation of the As-built plans as the work progresses.
• Review of all contractor (s) documentation and test records for adequacy at the time of hand over.
• Accepts and review for completeness and hand over to the Owner all operations and maintenance manual.
• Assist the Owner with the warehousing management of surplus stock items (if there is any), specified in the contract documents.
• Prepare a punchlist (defect lists) of all items of the works which require correction after the Project is substantially completed and before the final inspection is made by the Owner.
•Ensures the each items for correction in the punchlist is corrected before initial acceptance is recommended by the Owner.
• Collate all punchlists of the Project Technical Group (PTG), Owner’s marketing and sales group for rectification of the contractors / vendors / subcontractors.
• Record all approved deviations and reviews the as-built plans which shall be prepared by the contractors prior to final drafting. These shall be incorporated in the original drawings, and handed over to the Owner.
• Determine and prepares the list of scrap and surplus materials from those which were supplied by the Owner. These exclude all materials covered by the guaranteed quantities of the contractors.
• Submit status, utilization report and inventory list of all properties of the Owner on the Project site.
• Toward the end of construction, list of deficiencies that need to be corrected are listed (punchlist). Arrange joint inspection once rectification works are all done accepted.
• During the construction, we require contractors to submit partial / preliminary As built drawings together with the Progress Billings so final shop drawings can be easily checked on accuracy.
• As part of the project handover, all operations and maintenance manuals are consolidated and submitted to Owner for reference of the Building Operations and Maintenance Group.
• All copies of the warranty agreement / certificate provided by the Contractors and Suppliers are consolidated and submitted to Owner at the end of the Project Construction.

• Assist Quality Control Supervisor / Assistant Supervisor in evaluating of constructed infrastructure prior to turnover to client.
• Review Plans and documents made by the contractors prior to inspection.
• Checks and monitors compliance and conformity of construction to design and specifications.
• Conducts site inspection to validate the installed system prior to turnover
• Attend the weekly site coordination meeting.
• Make technical reports
• Review Turnover documents to Units, Common Areas, Hallway and Amenities to Owner / Client.
• Ensures the quality records, acceptance certificate, completion certificates and documentation for specific systems and Buildings / areas are prepared and collated in accordance with project requirements.
• Coordinate with the construction group for the completion of turnover of as built turnover documentation.
• Plan and Direct all activities concerned with the project coordination activities.
• Assist QC Head (Head Office) in evaluating the constructed infrastructures prior to turnover.

• Supervising and overseeing the direction of the project (or a package), ensuring that the client’s specifications and requirements are met, reviewing progress and liaising with quantity surveyors to monitor costs
• Liaising with the client, other construction professionals and, sometimes, members of the public
• Coordinating and supervising construction workers
• Selecting tools and materials
• Making safety inspections and ensuring construction and site safety
• Checking and preparing site reports, designs and drawings
• Maintaining quality control procedures
• Finding ways to prevent problems and to solve any that crop up
• Assessing and minimizing risk
• Writing reports and keeping on top of paperwork
• Helping to negotiating contracts and securing permits and licenses.

• Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.
• Formulating project parameters and assigning responsibilities to the most capable employees and monitoring the project team
• Interacting with clients, interpreting their needs and requirements, and representing them in the field.
• Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project’s status.
• Cooperating and communicating with the project manager and other project participants and collaborating with senior engineers to create more efficient project methods and to maintain the projects profitability.
• Reviewing the engineering tasks and initiating the necessary corrective actions. • Developing specifications for the project’s needed equipment
• Creating frameworks to measure the project’s metrics and data collection
• Establishing field test methods and methods for monitoring quality of those tests • Ensuring the projects compliance with the applicable codes, practices, policies, performance standards, and specifications.

• Responsible for ensuring that the quality of the works being delivered by the project team is in compliance with the project quality plan, procedures, and instructions.
• Implement the QA/QC management system at the site
• Coordinate with quality inspections with all the site sub-contractors and vendors coordinate all non-destructive testing on site
• Coordinate with the customers representative on all quality matters
• Coordinate all receipt inspections
• Distribute relevant QA/QC documentation to site subcontractors
• Verify that the quality-related site activities are in accordance with the applicable codes and standards
• Participate in the site internal and external site audits
• Coordinate all the quality site inspections through the site QC inspectors
• Ensure all quality control documentation is compiled and completed for as-built hand over through the QC turnover engineer
• Control all non-conformance reports and undertake remedial action
• Compete site quality control instructions and action remedial responses
• Review the customer’s specification and undertake relevant training to the site QC inspector
• Monitor the implementation of the approved site QC Plan
• Complete and coordinate the approval of the site QC technical submittals to the customer
• Coordinate with the site construction manager on all quality issues Coordinate and chair the QA/QC site weekly meetings with the project’s subcontractors QC personnel
• Elaborating inspection and test programs
• Ensure the safety is adhered to at the site
• Assure all technical documents relative to site quality control are the current status

Supervise QA/QC Works

Duties and Responsibilities:
• Prepares two primary types of drawings: Erection drawings and Shop drawings
• Generate the drawings that the fabricator will use to cut and weld all the necessary members.
• Generates the layout instructions to facilitate the installation and erection of the steel framework.
• Compilation of Bills of Materials, Field and Shop Bolt Lists, and other documentation as required.
• Drafting erection and fabrication drawings of stairs, handrails, and other miscellaneous and ornamental metal items or structural steel.

Duties and Responsibilities:
• Preparation of Bill of Quantity with complete unit price.
• Preparing cost comparison and evaluate the unit rate of the sub-contractors quotation.
• Coordinate with approved vendors for the supply and sub-contract quotation.
• Evaluate tender clarification in order to incorporate in tender price.
• Reviewing tender and contract documents.

Duties and Responsibilities:
• Create structural drawings or project plans using AutoCAD or another computer-aided design program to describe the specifications for rebar or other steel construction materials in a project.
• Explores design data shown on the design drawings and project specifications to detail or record all the reinforcing steel members required for a specific section of the structure.
• Placing drawings for concrete reinforcing steel & Shop drawings for structural members.
• Reviewing all jobs weekly to ensure contracts are on schedule.

Duties and Responsibilities:
• Prepare estimates on new projects and estimate prices on change orders.
• Read and interpret job bid instructions and detailed specifications for preparations of estimates.
• Prepares work to be estimated by gathering proposals, blueprints, specifications, and related documents.
• Computes costs by analyzing labor, material, and time requirements.

• Proficient at analyzing and understanding Architectural, structural drawings as well as specifications and other documentation to prepare time, materials, and labor estimates.
• Skilled at developing estimates of raw building materials for Commercial projects to include the following product categories: engineer wood products, floor/roof trusses, wall panels, floor panels, siding and soffit materials, exterior deck materials. Confer with engineers, architects, owners, contractors, and subcontractors on changes and adjustments to cost estimates. 
• Prepares work to be estimated by identifying which materials are needed for each type of project, including all roof types, siding, gutters, etc.
• Perform other duties and responsibilities as required and assigned

• Proficient at analyzing and understanding Architectural, structural drawings as well as specifications and other documentation to prepare time, materials, and labor estimates.
• Skilled at developing estimates of raw building materials for Commercial projects to include the following product categories: engineer wood products, floor/roof trusses, wall panels, floor panels, siding and soffit materials, exterior deck materials. Confer with engineers, architects, owners, contractors, and subcontractors on changes and adjustments to cost estimates.
• Prepares work to be estimated by identifying which materials are needed for each type of project, including all roof types, siding, gutters, etc.
• Perform other duties and responsibilities as required and assigned.

• Serves as resident engineer/site lead for construction quality assurance.

• Manages and interprets the design document supplied by the architect; supervises and issues instructions to the contractor/workers.

• Managed the site focusing pletion of the project.

• Supervised and coordinated onsite staff, inhouse workers, subcontractors/trade contractors.

• Set up initial contract and project information in the project management information system.

• Participated in project permit processes and procurement. • Reviewed and tracked status of submittals and prepared RFIs and other documents.

• Modified management systems including receiving and reviewing of quotations, change orders and variations.

• Initiated purchase of materials, supplies and services; checked plans and quantities for accuracy of calculations of deliveries.

• Accomplished schedules and ensured all activities took place on or ahead of scheduled dates.

• Inspected subcontractor operations to ensure contract compliance; coordinated site testing and conducted quality inspections.

• Organized daily and weekly reports.

• Liaised the client and their representatives, and attended regular meetings for progress reports.

• Ensured the project delivers a quality standard; proper project handover of all documentation including O&M manual and others.

• Planned and implemented quality management system and all documentation and filing of inspection and testing activities.

•Supervised project activities based on indicated on approved plans and drawings, and compliance to quality management system.

• Assured that the task is performed to the fullest of the efficiency.

• Provided planning, supervision, monitoring and implementation of construction project.

• Ensured all project materials are utilized; prevented loss and damage of materials and maintained project housekeeping and safety.

• Utilized quality work and maximum work force in project site to complete the project within target time.

• Evaluated and prepared billing statement to customer to ensure billings are settled on or before deadline.

• Prepared and submitted accurate accomplishment report and attended internal and external clients/customers.

Construction Arizona, USA Project Coordinator Scope: Painting • Organizes all project documents from the bid list to On-Screen Takeoff and Quick Bid. • Color code drawings upon award of projects to get quantities for the site. • Maintains project documentation, file organization, and email interception. APRO ENTERPRISES, INC. Construction Maryland, USA Estimator Scope: Demolition • Provides accurate quantity takeoff, assesses the total construction cost, and produces cost estimates and proposals. • Handles bids email and bid tracker. SERVICE ONE CONSTRUCTION, INC. & SERVICE 1 PAINTING Construction New York, USA Lead Organizer/Estimator Scope: Carpentry, Drywall and Painting • Handled estimating emails and maintains the bid list for project files. • Announced all project-related matters to the team, such as RFI responses, alterations or deductions, and addenda. • Monitored estimating progress and prepares estimating weekly status reports. • Provided details for ongoing projects to the project management team. • Was in-charge of project coordination with the estimating team. • Generated project takeoffs and bid proposals. CUSTOM DESIGN INNOVATIONS Construction New York, USA Estimator Scope: Carpentry and Drywall • Analyzed project requirements, ensuring accurate and detailed estimates. • Performed construction admin duties and tasks such as providing project takeoffs and creating bid proposals.

•  Handles and supervise assigned various projects.
• Coordinate with the Government contractors regarding project status, progress, accomplishments and billings.
• Prepares contractors billing documents and reviews/approves accomplishment reports.
• Prepares plans, schedules and other project documentations
• Reports directly to the District Manager

• Reports to Project Manager Prepares all construction documents from Quantity Surveying, Bar charts, materials/labor takeoffs, scheduling and project close out documentations.
• Handles and supervise projects.
• Coordinates with the client’s Architects and Building Administrator.
• Design and drafts plans for various clients through AutoCAD. Reports directly to the General Manager.

•  Reporting to the Vice President for Operations Prioritize, plan and coordinate project development activities according to customer requirements.
• Supervise development team on daily basis to execute assigned projects within deadlines and budget.
• Act as primary contact for customer queries and concerns.
• Perform customer negotiations for contractual terms and agreements.
• Prepare project proposals and develop project plan, schedule and budget.
• Assess potential risks and technical challenges and develop appropriate mitigation plans.
• Perform cash flow analysis and process invoices in a timely fashion.
• Develop business presentations for customer as needed.
• Develop cost reduction initiatives while maintaining quality and productivity.
• Interact with customers to clearly understand business needs and expectations.
• Build positive working relationships with customers and ensure customer satisfaction.
• Analyze and resolve project issues in timely and accurate manner.

• Reporting to Head of Construction Handles and manages Alteration and Additional Projects
• Conduct weekly meetings with engineering, designers and consultants
• Supervises Subcontractors daily activities and accomplishments
• Ensuring that both the health and safety project plans are implemented
• Being on site to oversee all the construction process
• Organizing the Site Admin/Engineers for ensuring that they are performing as required
• Ensuring that the stipulated safety rules and regulations are met Follows the project construction process to ensure that it is completed in time
• Monitors the subcontractors that they are punctual and that they deliver the target schedule 
• Ensure that quality is preserved in the construction process and that the budget is maintained
• Review and assess different construction methods, sequencing, potential problems and timelines
• Implements engineering/construction plans/specifications, methods and procedures

•  Reporting to the President & Client, Presides Construction Coordination Meeting, Project Management Technical Meeting & Health, Safety, & Environment Meeting. Implements project plans to meet objectives
• Coordinates and integrates project activities Manages, leads, administers project resources
• Monitors project activities and resources to mitigate risk Implements and maintain quality assurance processes
• Makes improvements, solves problems, takes corrective actions when problems arise
• Gives presentations or briefings on all aspects of the projects
• Participates in phase, milestone, and final project reviews Identifies project documentation requirements or procedures
• Develops and implements work cycle, look ahead schedules and target date plans
• Manage Construction Progress

•  Reporting to Project Manager Handles and supervises manpower’s daily activities and accomplishments
• Ensuring that both the health and safety project plans are implemented
• Being on site to oversee all the construction process
• Ensuring that the budget is followed in terms of purchases and wages
• Organizing the workers and ensuring that they are performing as required
• Recording the total costs for materials bought and payments for work done
• General inspection of the workers and their performance and safety
• Ensuring that the stipulated safety rules and regulations are met Follows the project construction process to ensure that it is completed in time
• Supervises the subcontractors and ensures that they are punctual and that they deliver
• Ensure that quality is preserved in the construction process and that the budget is maintained
• Reports daily, weekly and monthly accomplishment.